Guangdong 40 ton clothing compression baler vertical waste paper baler manufacturer

Description :

　　Guangdong 40 ton clothing compression baler vertical waste paper baler manufacturer

　　The vertical hydraulic baler is mainly suitable for recycling waste paper, paper shells, cardboard, plastic beverage bottles, cans, scrap aluminum alloys, scrap metals, stainless steel, plastic films, woven bags, clothing, fabrics, beverage cans, industrial scraps and other packaging materials and waste. This vertical packaging machine reduces waste storage space, saves up to 80% of stacking space, lowers transportation costs, and is beneficial for environmental protection and waste recycling. Becoming an ideal choice for packaging equipment in paper companies, waste paper recycling plants, plastic processing industries, and other industries.

　　Characteristics of hydraulic strapping machine:

　　1. Hydraulic system achieves no-load start: After pressing the start button, the hydraulic pump starts. At this time, all solenoid valves' electromagnets are in a power-off state, and the oil from the hydraulic pump flows back to the oil tank through the three position five way solenoid valve.

　　2. The implementation of fast forward adopts a limited pressure variable hydraulic pump and hydraulic cylinder differential link, which can achieve faster fast forward speed and more reasonable energy utilization.

　　3. Fashionable appearance, exquisite workmanship, four bundling grooves, three breadboards, single-sided feeding, convenient operation

　　4. Equipped with advanced electrical control components, it is easy to operate, durable, and can be used without debugging. It can be manually bundled and automatically flipped.

　　5. Rigid pressure plate structure, convenient for recycling various waste materials, fast compaction, low noise, and high efficiency; During non pressure stroke operation, the pressure plate automatically returns to its unloaded position to avoid a decrease in power due to high oil pressure.

　　Parameters of vertical hydraulic baler:

　　Using Superpowers:

　　1. Thread the packing rope through the automatic elastic device behind the vertical waste paper baler, and place it along the packing belt groove. Then tie the packing belt to the pull stop at the bottom of the packing groove, rotate the automatic elastic device 90 degrees, and close the bottom door to lock it.

　　2. Input materials. When the materials are loaded to the height of the pressure plate, close the door tightly and press the "down" button. The equipment runs automatically and compacts. The feeding height of materials other than cardboard can only be slightly higher than the bottom door.

　　3. The pressure plate moves downward and automatically returns to the fully open position after reaching the compression pressure. When compressing and packaging constraints, the pressure plate stops at the preset position of the compressed material.

　　4. Open the equipment door and thread the binding rope through the bottom groove from front to back and back to the front through the pressure plate groove. Tighten the binding rope and tie it with your hand. Push the packing rod by hand, push the rod to a fixed position, and tighten it. Press the "up" button, and the return stroke of the oil cylinder will automatically flip out the bundled package. (No one is allowed to stand in front of the door when opening it to avoid accidental injury caused by the door popping open)

　　5. After the package is ejected, reset the packaging rod to perform a downward pressure action. Remove the packaging bundle, close the door and lock it to enter the next packaging cycle task.

　　Maintenance and upkeep:

　　1. Check the hydraulic system, including checking for cracks, leaks, and looseness in the hydraulic joints, wear and breakage in the hoses, abnormal noise and vibration in the pumps and valves, checking if the fluid level is at 1/2 of the tank position, if the pressure plate is fully raised, and also checking for any dirt in the fluid;

　　2. Check if the excuses for the original electrical components are sturdy;

　　3. Check the sequence of packaging operations;

　　4. Check safety switches and interlocking devices.

　　5. Add butter to the guide tube every month to maintain lubrication.

　　After-sales service

　　1. Regarding the price: The prices marked online are all reference prices, and the information published on each website varies. We cannot introduce the price of each model one by one. We hope that customers can contact our customer service for detailed prices and mechanical parameters of each model when placing an order.

　　2. Regarding payment: The down payment can be used for logistics express delivery, and the remaining payment will be made after the goods arrive!

　　3. Regarding shipping costs: Our prices do not include shipping costs, as shipping costs vary across different regions of the country. The shipping fee needs to be calculated based on the size of the equipment purchased by the customer and the distance of the road. Please contact our customer service for specific fees.

　　4. Regarding after-sales service: Any machinery sold by our company comes with a one-year warranty, and any parts needed within one year will be replaced free of charge

AfterSalesService :

• 40 ton clothing compression and packaging machine