Brick factory desulfurization, dust removal tower, defogger assembly, honeycomb packing desulfurization tower, PP water trap supplied by the manufacturer

Description :

　　Brick factory dust removal, desulfurization tower, defogger assembly, water collector, desulfurization tower, PP steam trap supplied by the manufacturer

　　The dust removal and desulfurization tower defogger in the brick factory is used to separate the liquid droplets carried by the gas in the tower, to ensure mass transfer efficiency, reduce valuable material loss, and improve the operation of the compressor after the tower. Generally, defoggers are installed at the top of the tower. It can effectively remove fog droplets of 3-5um. If a defogger is installed between the trays, it can not only ensure the mass transfer efficiency of the trays, but also reduce the spacing between the plates.

　　The dust removal and desulfurization tower defogger in the brick factory is mainly used for gas-liquid separation. It can also be used as an air filter for gas separation. Wet desulfurization also contains dissolved salts, sulfur dioxide, and other substances. Any "fog" entering the chimney actually releases sulfur dioxide into the atmosphere, while also causing contamination and severe corrosion of fans, heat exchangers, and flues. Therefore, the wet desulfurization process requires defogging of the absorption equipment, and the purified gas must be defogged before leaving the absorption tower. The dust removal and desulfurization tower defogger in the brick factory is a key equipment in the flue gas desulfurization system, and its performance directly affects the continuous and reliable operation of the wet flue gas desulfurization system. The malfunction of the defogger not only causes the shutdown of the desulfurization system, but may even lead to the shutdown of the entire unit (system).

AfterSalesService :

• Dust removal tower defogger