Customized packing bracket for fiberglass grating cooling tower

Description :

　　Advantages of fiberglass filling bracket

　　1. Lightweight, the specific gravity of fiberglass material is 1.8-1.9, which is only one fourth of cast iron, making it easy to transport

　　2. High strength, the longitudinal tensile and bending strength of the bracket bearing I-beam profiles and connecting rods is about 500Mpa, and the bending elastic modulus is about 300Mpa, which can meet the requirements of large cooling tower packing support;

　　3. Corrosion resistant, fiberglass material is resistant to moisture and does not rust. It can be widely used in humid working environments ranging from -40 ℃ to 60 ℃.

　　4. Good designability, different thicknesses of I-beam profiles can be selected according to different support requirements, and the grid spacing can also be customized according to customer needs.

　　Preparation work before construction

　　1. The installation of fiberglass grates can only be carried out after the lifting and acceptance of the sprinkler structure is qualified. The filling material should be installed immediately after the installation and acceptance of the fiberglass grates are qualified;

　　2. All construction personnel must receive primary and secondary safety education and pass the examination before they can start working. Provide three-level safety education to new construction personnel;

　　3. Conduct comprehensive physical examinations for all construction personnel, promptly adjust the construction team for those who are physically unqualified, and prohibit high-altitude operations for personnel with myopia or other conditions that affect construction and safety;

　　4. The construction machinery and equipment, brackets, water filling materials, etc. used for construction shall be transported to the construction site. A dedicated electrician shall connect the winch to the power supply and fix it on the column. Wooden boards shall be used to protect the column around it to prevent pulling.

　　Packing bracket size: The conventional hole spacing is 30 * 25cm, with thicknesses of 25mm, 30mm, 38mm, 50mm, and 65mm. (The hole spacing can also be customized according to customer needs)

　　The basic components of fiberglass filling bracket are resin and glass fiber (including cloth, felt, etc.). It is reinforced with fibers (including glass fiber, carbon fiber, organic fiber, and other metal and non-metal fibers) as the reinforcing material, resin (mainly epoxy resin, polyester resin, phenolic resin) as the bonding agent, and other auxiliary materials (mainly mold release agent, curing agent, catalyst, sealing agent, UV light stabilizer, mold cleaning water, adhesive coating, etc.) by extrusion. It has a series of excellent characteristics such as high temperature resistance, corrosion resistance, high strength, low specific gravity, low moisture absorption, low elongation, and good insulation.

AfterSalesService :

• fiberglass grating