Good opportunity cooling tower collector 600-170PP material fanless cooling tower collector customization

Description :

　　Windless opportunity cooling tower collector A Dazhou windless opportunity cooling tower collector A windless opportunity cooling tower collector manufacturer

　　The water collector of the windless opportunity cooling tower is a supporting water collection component of the non powered opportunity cooling tower. It is mainly composed of a set of water collection plates, and the water collection plate is a sheet-like structure. The two sides of the water collection plate are equipped with corresponding insertion plates and grooves, and the two sides of the water collection plate are also equipped with convex ribs. When in use, inserting the insertion plate of each water collection plate into the corresponding groove is the water collector composed of a set of water collection plates. Placing the windless opportunity cooling tower water collector in the cooling tower can not only allow the hot air of the cooling device to be smoothly discharged, but also increase the contact surface area between the hot air and the water blocking plate. The water collection effect is good, the water loss is small, and it can effectively reduce floating water. Phenomenon.

　　Feature 1: High water collection efficiency - According to on-site testing by authoritative national testing departments, the water collection efficiency of this water collector can achieve a floating water loss of less than 0.001% based on the circulating water volume, which is only one tenth of the national standard allowable value and reaches the advanced level of similar foreign products;

　　Feature 2: Low resistance and energy-saving - with low airflow resistance, the ventilation resistance loss is about 0.8mmH2O at a wind speed of 2.8m/s, which is lower than similar foreign products;

　　Feature 3: Water saving and environmental protection - greatly reduces the loss of floating water in the cooling tower, reduces the amount of supplementary water and treatment agents used in the circulating water system, and at the same time, the impact of floating water in the cooling tower on the surrounding environment is also minimized;

　　Feature 4: High strength, easy installation and maintenance - The water collector plate is injection molded by a mechanism to ensure consistency in molding. The plates are connected by socket and plug to provide good strength and overall rigidity, making installation and maintenance extremely convenient;

　　Characteristic 5: Long life design - the modified PP material contains an imported carbon black raw material, which enables the product to have excellent UV resistance, anti-aging and mechanical properties. Under normal use conditions, the service life can reach 20 years.

AfterSalesService :

• Cooling tower collector