Power plant cooling tower packing bracket, cooling tower fiberglass packing bracket, packing support bracket

Description :

　　The basic components of power plant cooling tower packing bracket and cooling tower fiberglass packing bracket are resin and glass fiber (including cloth, felt, etc.). The power plant cooling tower packing bracket and cooling tower fiberglass packing bracket are made of fiber (including glass fiber, carbon fiber, organic fiber, and other metal and non-metal fibers) as reinforcement material, resin (mainly epoxy resin, polyester resin, phenolic resin) as bonding agent, and other auxiliary materials (mainly mold release agent, curing agent, catalyst, sealing agent, UV light stabilizer, mold cleaning water, adhesive coating, etc.) by extrusion. The cooling tower packing bracket for power plants has a series of excellent characteristics such as high temperature resistance, corrosion resistance, high strength, low specific gravity, low moisture absorption, small extension, and good insulation.

　　Power plant cooling tower packing bracket, cooling tower fiberglass packing bracket, advantages of power plant packing support bracket

　　1. Lightweight, the specific gravity of fiberglass material is 1.8-1.9, which is only one fourth of cast iron, making it easy to transport

　　2. High strength, the longitudinal tensile and bending strength of the bracket bearing I-beam profiles and connecting rods is about 500Mpa, and the bending elastic modulus is about 300Mpa, which can meet the requirements of large cooling tower packing support;

　　3. Corrosion resistant, fiberglass material is resistant to moisture and does not rust. It can be widely used in humid working environments ranging from -40 ℃ to 60 ℃.

　　4. Good designability, different thicknesses of I-beam profiles can be selected according to different support requirements, and the grid spacing can also be customized according to customer needs.

　　Preparation work before construction of power plant cooling tower packing bracket, cooling tower fiberglass packing bracket, and power plant packing support bracket

　　1. The installation of fiberglass grates can only be carried out after the lifting and acceptance of the water pouring structure is qualified. The filling bracket for the cooling tower of the power plant and the fiberglass filling bracket for the cooling tower can be installed immediately after the installation and acceptance of the power plant filling support bracket are qualified;

　　2. All construction personnel must receive primary and secondary safety education and pass the examination before they can start working. Provide three-level safety education to new construction personnel;

　　3. Conduct comprehensive physical examinations for all construction personnel, promptly adjust the construction team for those who are physically unqualified, and prohibit personnel with conditions such as myopia that affect construction and safety from working at heights;

　　4. The construction machinery and equipment used for construction, power plant cooling tower filling bracket, cooling tower fiberglass filling bracket, power plant filling support frame, water spraying filling, etc. shall be transported to the construction site. A dedicated electrician shall connect the winch to the power supply and fix it on the column. Wooden boards shall be used to protect the column around it to prevent damage.

　　Power plant cooling tower packing bracket, cooling tower fiberglass packing bracket, power plant packing support bracket: The conventional hole spacing is 30 * 25cm, and the thickness is 25mm, 30mm, 38mm, 50mm, 65mm. (The hole spacing can also be customized according to customer needs)

AfterSalesService :

• Cooling tower packing bracket