Fiberglass packing support cooling tower packing support yellow cooling tower packing support

Description :

　　Fiberglass packing bracket cooling tower packing bracket yellow cooling tower packing bracket is extruded from fiberglass material. The advantages of cooling tower packing bracket are:

　　1. Lightweight, easy to transport and install. 2. Fiberglass material does not rust and can be widely used in humid working environments ranging from -40 ℃ to 60 ℃. 3. The longitudinal tension of high-strength bracket carrying I-shaped profiles and connecting rods can meet the requirements of large cooling tower packing support. 4. Fiberglass packing bracket for cooling tower, yellow cooling tower packing bracket, has good designability. Different I-shaped profiles can be selected according to different support requirements, and the grid spacing can be adjusted freely. The external dimensions can be assembled and cut on site according to actual conditions.

　　Fiberglass filled bracket for cooling tower, yellow filled bracket for cooling tower, with a specific gravity of 1.8-1.9, which is only a quarter of cast iron, making it easy to transport; The longitudinal tensile and bending strength of the bracket carrying I-beam profiles and connecting rods is about 500Mpa, and the bending elastic modulus is about 300Mpa, which can meet the requirements of large cooling tower packing support; Corrosion resistant, fiberglass material is resistant to moisture and does not rust. It can be widely used in humid working environments ranging from -40 ℃ to 60 ℃. Good designability, different thicknesses of I-beam profiles can be selected according to different support requirements, and the grid spacing can also be customized according to customer needs.

　　The basic components of the yellow cooling tower packing bracket are resin and glass fiber (including cloth, felt, etc.). It is reinforced with fibers (including glass fiber, carbon fiber, organic fiber, and other metal and non-metal fibers) as the reinforcing material, resin (mainly epoxy resin, polyester resin, phenolic resin) as the bonding agent, and other auxiliary materials (mainly mold release agent, curing agent, catalyst, sealing agent, UV light stabilizer, mold cleaning water, adhesive coating, etc.) by extrusion. It has a series of characteristics such as high temperature resistance, corrosion resistance, high strength, low specific gravity, low moisture absorption, low elongation, and good insulation.

　　Preparation work before construction

　　1. Only after the lifting and acceptance of the water pouring structure is qualified can the installation of the yellow cooling tower packing support bracket for the fiberglass packing support bracket be carried out. The installation of the yellow cooling tower packing support bracket for the fiberglass packing support bracket for the cooling tower shall be carried out immediately after the installation and acceptance of the yellow cooling tower packing support bracket for the fiberglass packing support bracket are qualified;

　　2. All construction personnel must receive primary and secondary safety education and pass the examination before they can start working. Provide three-level safety education to new construction personnel;

　　3. Conduct comprehensive physical examinations for all construction personnel, promptly adjust the construction team for those who are physically unqualified, and prohibit high-altitude operations for personnel with myopia or other conditions that affect construction and safety;

　　4. The construction machinery and equipment used for construction, fiberglass filling brackets, cooling tower filling brackets, yellow cooling tower filling brackets, and sprinkler filling materials should be transported to the construction site. A dedicated electrician should connect the winch to the power supply and fix it on the column. Wooden boards should be used to protect the column around it to prevent it from being pulled.

　　Fiberglass packing bracket for cooling tower, packing bracket for yellow cooling tower, packing bracket size: The conventional hole spacing is 30 * 25cm, and the thickness is 25mm, 30mm, 38mm, 50mm, 65mm. (The hole spacing can also be customized according to customer needs)

AfterSalesService :

• Fiberglass filling bracket