Evaporative Cooling Point Wave Packing Square Point Wave Suspension Packing Cooling Tower Point Wave Suspension Packing Manufacturer Supply

Description :

　　Evaporative Cooling Point Wave Packing Square Point Wave Suspension Packing Cooling Tower Point Wave Suspension Packing Manufacturer Supply

　　1、 Evaporative cooling point wave packing square point wave suspension packing cooling tower point wave suspension packing has good heat dissipation, low ventilation resistance, high rigidity, large surface area, strong water redistribution ability, uniform water film formation, long residence time, and large pore size. The evaporative cooling point wave packing square point wave suspension packing cooling tower point wave suspension packing sheet is bonded with PVC adhesive, with a bonding rate of not less than 95%. The flat compressive strength of the packing block is ≥ 3000N/m2, and the shear strength after 24 hours of bonding is greater than 3.3MPa.

　　2、 Evaporative cooling point wave packing, square point wave suspension packing, cooling tower point wave suspension packing

　　1) Sheet type: 500 * 1200 black with collector point wave packing wave type, evaporative cooling point wave packing square point wave suspension packing cooling tower point wave suspension packing channel (sheet distance and wave distance) not less than 16-20mm.

　　2) Material: Modified PVC plastic, flame retardant. No geometric deformation occurs under 65 ℃ conditions, and no breakage or brittle fracture occurs under design low temperature conditions.

　　3) The basic technical requirements for the assembly of evaporative cooling point wave packing, square point wave suspension packing, and cooling tower point wave suspension packing are good rigidity and strong load-bearing capacity. Under normal usage conditions, it does not deform or twist, does not become loose or prone to lodging, and can maintain stable operation for many years.

　　4) The channel size of the assembly block is large, the smoothness is good, it is not easy to block, and it can maintain a stable cooling effect throughout the year.

　　5) 500 * 1200 evaporative cooling point wave packing square point wave suspension packing cooling tower point wave suspension packing standard assembly block geometric dimensions: square tower packing assembly block: 1200 (length) × 500 (width) × 500 (height) mm. Assembly method: adhesive and hanging.

　　6) Evaporative cooling point wave packing square point wave suspension packing cooling tower point wave suspension packing upper and lower layers are arranged in a staggered manner. The filling material should be tightly laid inside the tower, and there should be no incomplete support such as hanging corners or tower leakage in irregular areas.

AfterSalesService :

• Evaporative cold wave packing material