Cooling Tower Inlet Window Closed Cooling Tower High Efficiency Water Collector Water saving Cooling Tower PVC Inlet Window

Description :

Cooling Tower Inlet Window Closed Cooling Tower High Efficiency Water Collector Water saving Cooling Tower PVC Inlet Window

　　The air intake window of a closed cooling tower, also known as an air intake grille, is made of high-strength PVC sheet and bonded together. The surrounding frame can be made of galvanized steel plate or stainless steel material. The height and width can be customized as desired, with a thickness of over 60 millimeters.

　　Closed cooling tower air inlet windows are mainly used on the air inlet of closed cooling towers. Compared with ordinary air inlet louvers, this closed cooling tower air inlet window has at least the following three benefits:

　　1. The appearance is more attractive, and many foreign brands of closed cooling towers use this type of air inlet window.

　　2. Do not splash water outside the cooling tower. This type of air intake grille needs to be turned three times to reach the outside of the cooling tower, so there will be no splashing of water droplets outside the tower.

　　3. Prevent direct sunlight from entering the cooling tower collection tray. The collection tray of a cooling tower under direct sunlight is prone to the growth of bacteria and algae, while using this PVC air intake grille will prevent sunlight from entering the collection tray.

　　Most cooling tower air intakes are equipped with louvers. But blinds are prone to splashing water. After the air enters the air inlet window, it needs to change direction to enter the cooling tower, so there will be no splashing problem. This type of air intake window supports customization. According to the actual size of the cooling tower's air inlet window. During installation, simply gently push into the cooling tower and tighten it. Maintenance and repair are very convenient. The goal of researching water collectors is to improve water collection efficiency while reducing ventilation resistance. In a mechanical ventilation cooling tower, the air flow required for water cooling is supplied by fans installed on the top of the tower. The fans used for cooling towers are basically specialized axial flow fans, which are characterized by high air volume and low air pressure. The air volume and air pressure can be changed by adjusting the blade angle. They can operate continuously outdoors for a long time without failure and can rotate in both directions.

　　The closed cooling tower air inlet window can be used for cooling tower air inlet or other situations where the air inlet blocks floating water. Lightweight and resistant to high strength. Not easily aged. Lightweight, it can greatly reduce the foundation support and lower the material cost of the project. Its cutting and installation are simple, without the need for hot work or large lifting equipment, requiring only a small amount of manual labor and electric tools, greatly reducing installation costs.

AfterSalesService :

• Cooling tower air inlet window