13.75-meter flying wing box semi-trailer
Product Introduction Wing opening box type transport vehicle, also known as wingspan vehicle, flying wing vehicle, etc., is a structural form of box type transport vehicle. It is a specialized vehicle that can open one or both sides of the side panel upward simultaneously through manual, electric or hydraulic devices to achieve side loading and unloading of goods. The vehicle has the following functions: quick loading and unloading function: the wing opening box type vehicle can open the side panels at a fast speed, forming a flying wing shape, and the forklift can load and unload pallet goods on both sides at the same time. The side wings have good strength and can effectively protect goods and prevent theft and theft. After the side wings are closed, the cabin is fully enclosed to prevent rain and moisture. New Announcement and Highlights: The larger volume, lighter weight, and larger capacity wing opening box type transport semi-trailer is another new product developed by Hongsheng for wing opening box type transport semi-trailer. On the basis of the original product, this product has achieved a double-layer loading tray at the middle and rear ends, which can accommodate 46 standardized trays with a length of 1.2, a width of 1, and a height of 1.2 meters, while the original structural product can only accommodate 26 standard trays. The successful development of this product greatly improves the loading efficiency. For ultra-high pallets, the vehicle retains the original model's ability to load 26 pallets, making it more adaptable to pallet loading. The car has a stronger function with a goose neck structure frame made of high-strength steel, equipped with small tires and air suspension, achieving an ultra-low loading platform and increasing the height inside the cabin. Feiyi adopts lightweight honeycomb panel material instead of the original aluminum alloy wavelet patterned panel, with a flat surface and high strength. The panel is a whole panel without any splicing, greatly improving its rainproof performance. In addition, the outer surface of the box board is particularly suitable for advertising. The lower part of the compartment is equipped with all aluminum alloy profile railings, which have high strength and light weight. The pile insertion adopts a whole flip type, making operation more convenient. In order to reduce its own weight and increase its loading capacity, the vehicle also adopts various lightweight designs. After completion, the entire vehicle is more than 1 ton lighter than similar domestic models. Under the premise of a constant total weight, it has increased the loading capacity and increased the profitability of customer transportation. Since the development of the flying wing box type transport semi-trailer, Hongsheng Ruixin has always adhered to the design principles of high quality and high performance. Over the past 15 years, the product structure has been continuously optimized, and patented technologies have been formed in key areas such as top rainproof performance and flying wing connection. The Feiyi carriage adopts imported power units and Yancheng oil roof. The carriage is made of internally sealed galvanized sheet (not sealed at the top), corrugated board, and waterproof tarpaulin on the top. There are 12 horizontal rings on each side of the bottom plate. This wingspan carriage has good sealing performance, suitable for mechanical quick loading and unloading, fast speed, high efficiency, time-saving, labor-saving, and cost saving. Mainly used for the transportation and distribution of automotive parts, paper, household appliances, clothing, chemicals, beverages, food, and other items.
