New information on the market of skeleton wingspan semi-trailer light three axle flying wing transport vehicles

Description :

　　A box type transport vehicle is a specialized vehicle that can open one or both sides of the side panel upward through manual, electric, or hydraulic devices to achieve side loading and unloading of goods. The vehicle has the following functions: quick loading and unloading function: the wing opening box type vehicle can open the side panels at a fast speed, forming a flying wing shape, and the forklift can load and unload pallet goods on both sides at the same time. The side wings have good strength and can effectively protect goods and prevent theft and theft. After the side wings are closed, the cabin is fully enclosed to prevent rain and moisture.

　　It has the following characteristics: 1. High loading and unloading efficiency. The large lifting height of the trunk wing is higher than that of the front and rear panels. With the rear door open, it can load and unload goods from multiple angles, greatly improving loading and unloading efficiency and better meeting the requirements of modern logistics for convenient and fast loading and unloading of goods; 2. There are sealing strips installed between the vertical frames and columns of the side panels of the carriage, as well as between the wing panels and the front and rear panels, to achieve the sealing of the entire carriage. The top is riveted with a rainproof canopy and top sheet, making the entire carriage have rainproof, dust-proof, environmentally friendly and other properties. It is an all-weather transportation method that can effectively ensure high-quality transportation of goods; 3. Easy to operate, secure against theft, and reliable in terms of safety performance; The power part adopts a domestic hydraulic system, and the lifting cylinder adopts a cylinder diameter of Φ 45, a stroke of 400, and a system pressure of 16Mpa. The lifting force is large and the operation is reliable. The hydraulic system uses a button switch for lifting control, which can stop the wing plate at any position during lifting, and the operation is simple and convenient.

　　Due to the application of a large number of lightweight new materials in the wingspan vehicle series in recent years, the weight of the carriage has been reduced. In addition, the carriage design is beautiful and the transportation of goods is safe and reliable. It is expected to occupy a place in the logistics transportation market. The principle of the box type two wing car produced by Ruixin Company is to lift the vehicle by discharging the battery and driving the hydraulic system through the power unit. The lifting height can exceed the carriage and approach a 90 degree angle. Flying wing car is an improvement of ordinary box car. It is a specialized vehicle that can open the wing plates on both sides of the carriage through power springs, manual devices, or hydraulic devices. The top, front plate, and rear door structure of the car are the same as those of corrugated box car, and the sides are composed of flipping plates, upper side plates, and lower side plates. The Feiyi carriage adopts imported power units and Yancheng oil roof. This carriage is made of internally sealed galvanized sheet (not sealed at the top), corrugated board, and waterproof tarpaulin on the top. There are 12 horizontal rings on each side of the bottom plate.

　　In order to meet the needs of large logistics companies, the 3-axle flying wing semi-trailer has been officially listed as a production model by the Ministry of Industry and Information Technology. In order to optimize site limitations and meet the single loading and unloading of forklift rear doors without large indoor and outdoor sites, the company has specially developed a flat top flying wing, which greatly increases and meets the demand for forklift pallets to enter the carriage. The advantages of this vehicle are: 1. The exterior is made of aluminum corrugated or flat panels, and the interior is made of galvanized panels. 2. The lower end of the carriage is a fence board 50cm high, and a horizontal ring is installed at the bottom for easy fixation of goods. 3. The electro-hydraulic integrated lifting device is controlled by a power unit button, and the two wings can lift up to 90 degrees. 4. The carriage has four hydraulic dual circuit adsorption oil cylinders. 5. This vehicle has good sealing, dust prevention, Anti theft and rainproof, suitable for fast mechanical loading and unloading, mainly used for enterprises such as heavy equipment and clothing. This type of box type specialized vehicle is convenient for loading and unloading goods from the side, while ordinary box type vehicles can only load and unload goods from the rear door of the cargo compartment, and cannot load and unload goods quickly. In order to improve logistics efficiency, both sides of the compartment need to be completely open, and the loading and unloading equipment can directly load and unload goods from both sides. The wing opening type vehicle realizes the opening and closing of both side panels, greatly reducing the loading and unloading time of goods.

　　In addition, the control box is also equipped with a key switch. Only when the key switch on the control box is turned on, can the lifting of the wing board be operated to prevent theft of goods; 4. Diversified transportation: Due to the rectangular tube structure used in the side panel of the semi open wing box, with riveted skin on both the inside and outside, it has high strength and rigidity, which can effectively prevent the impact of goods. As long as the goods do not exceed the height of the side panel, the vehicle can also be used as a regular cargo truck, achieving diversified transportation of goods; 5. The appearance is beautiful and elegant, with a novel and smooth design. Advertisements can be placed on the side of the cabin, which is beneficial for users to promote their company.

AfterSalesService :

• Skeleton wingspan semi-trailer