Carefully designed 12 meter side flip semi-trailer, 60 box high tilting dump truck, factory price

Description :

　　The production material attributes of semi-trailer determine that its market development is closely related to the macroeconomic trend. In the future, the global economy will maintain a medium low growth rate. When using it, lubricating oil should be selected correctly according to regulations for each part, greatly saving unloading time and labor. The lifting mechanism should strictly adjust the oil on schedule. Transport according to the rated loading capacity, overloading is strictly prohibited. Operating procedure 1: Do not suddenly push the lifting handle to the "lowering position" during full load lifting. If this operational error occurs and the carriage suddenly rushes down, it will bring great impact force to the frame and even cause accidents. Therefore, the above operations should be avoided as much as possible. If there are special circumstances that require careful operation, the landing speed should be slowed down as much as possible, and the carriage must not be suddenly dropped to the bottom.

　　2. Do not use sudden lifting or braking to unload the vehicle. Due to the high inertia force of a heavy lift vehicle (usually 5-20 times the rated lifting force), it can easily cause deformation of the frame, welding of the carriage and subframe, burning of the oil pump or damage to the sealing ring, damage to the hydraulic cylinder, and reduce the service life of the vehicle. In severe cases, it may even lead to rollover accidents. So generally, dump trucks are prohibited from driving when lifting. 3. After unloading the goods, the dump truck must detach the power take-off before it can be driven. If this operational error occurs, during the operation of the dump truck, due to the power take-off being in the "engaged" position, the lifting oil pump will operate at high speed for a long time without load in the "small cycle" state. Causing the hydraulic oil temperature to rise rapidly, which can easily damage the oil seal of the oil pump and even lead to the phenomenon of the oil pump being burned to death; More seriously, the operation of the oil pump means that the hydraulic system has a power source, which can easily lead to accidents such as automatic lifting of the carriage during driving. 4. The power take-off should not be in the "on" position while driving

　　The height of the bulletin board of a regular dump semi-trailer is relatively low, not exceeding 0.6 meters. Nowadays, many roll over semi trailers use the announcement of box type semi trailers, which is called "invisible" roll over. There is a certain risk when checking the car, so it is important to think carefully when choosing. The quantity and size of hydraulic jacks depend on the tonnage of the brackets. If the truck exceeds the approved cargo weight by 30% or violates regulations to carry passengers, a fine of not less than 500 yuan but not more than 2000 yuan shall be imposed. The compartments of dump trucks are divided into two types: backward tilting and lateral tilting. The piston rod movement is controlled by the control system, and backward tilting is more common. Pushing the piston rod causes the compartment to tilt, while a few tilt in both directions. The high-pressure oil enters the lifting hydraulic cylinder through the distribution valve and oil pipe, and there is a driver's cab safety protection plate at the front end of the carriage.

　　Hydraulic top is an important component for rollover, generally ranging from 110 to depending on the load capacity A125、A130A、 For diameters of 150 and below, with a standard load of no more than 60 tons, use 110 with 5+1 (5 lifting cylinders, 1 shifting cylinder) or 130 with 4+1; For heavy loads ranging from 80 to 120 tons, a 150 ton oil cylinder with 6+1 or 7+1 is generally used. The displacement top usually uses a 160 or 180 cylinder. The brand that is commonly used is Haiwo, which has good quality and service, but the price is relatively expensive. There are also other general brands, including the 5+1 set of liquid pump power take-off 110, which costs nearly 10000 yuan. The main development direction of specialized trailer products in the future is to optimize various brands of specialized vehicles and strive to maintain their position in the same industry. Master international advanced chassis manufacturing technology, upper system integration technology, GPS positioning, TV and semi-trailer design (UG, PRO/E) applications. Firstly, specialized vehicles have broad market prospects. Secondly, the specialized vehicle market is increasingly demanding products with high technological content and high added value. Thirdly, we will intensify efforts to strengthen the management of the specialized vehicle market and advocate for diversified organizational forms of enterprises. With the development of China's national economy and the improvement of people's living standards, people have put forward higher requirements for the grade of specialized trailers. The interior design adopts a humanized design method, striving to achieve a level of interior design.

AfterSalesService :

• 12 meter overturned semi-trailer