The difference between imported formaldehyde tester American 4160-2 formaldehyde tester and domestic 4160-II formaldehyde tester

Description :

　　The difference between imported formaldehyde tester American 4160-2 formaldehyde tester and domestic 4160-II formaldehyde tester

　　I wrote an article about imports beforejiaAldehyde detector and domestically producedjiaThe difference between aldehyde detectors is that at that time, the article had a high browsing volume, which was also due to the publication of my article. Many customers saw it and left messages in the background asking me to help recommend a useful formaldehyde detector. Today, the hot editor will briefly introduce it to everyone.

　　Regarding several commonly used models on the current marketjiaAldehyde detector,

　　Interscan 4160-2 from the United StatesTheRIKEN FP-30MK2 (C)ThePPM ppm htv from the UK, ppm ppm st from the UK, and FM-801 from Graves in the US are commonly sold equipment that I have summarized from years of sales experience in the environmental protection industry. Today, the editor will mainly introduce the domestically produced 4160-II and imported 4160-2 to you jiaThe difference between aldehyde detectors. other stylesJia aldehyde detectorI will provide an introduction in another article. If you like my written content, please contact me~

　　 RCHB123: I3345O14433 Same V

　　We will provide a brief analysis and introduction from both similarities and differences,

　　Similarities, same range of 0.01ppm-19.99ppm, same resolution, same product configuration, can all pass inspection and meet indoor requirementsjiaAldehyde detection is particularly suitable for indoor usejiaAgents for aldehyde treatment, this domestically produced 4160-II The formaldehyde detector is really a great product.

　　Since the equipment is so good, what is the difference between domestic and imported?

　　According to rumors, hehe, the sensors must be different,

　　1) Imported sensors require water injection operation, but the domestically produced 4160-ii modelJia aldehyde detectorIt is maintenance free and does not require water injection operation

　　2) There are differences in terms of batteries, imported onesThe formaldehyde detector has two sets of batteries, one is a rechargeable battery and the other is an alkaline battery. They are responsible for different tasks, such as supplying power to sensors, pumps, gas circuits, and alarm devices. However, the domestically produced oneThe formaldehyde detector only has one set of lithium-ion rechargeable batteries and no other batteries, which can fully meet the power supply of the entire device.

　　3) There are differences in the interfaces of chargers, one is headphone jack type, and the other is.. I can't describe it, but there is a difference anyway.

　　The rest is really impeccable. Come and consult, it's not expensive, hehe.I3345O14433 Same V

　　domestic4160-II jiaAldehyde detector Brief introduction:

　　4160-II typejiaThe aldehyde analyzer adopts high sensitivity imported from the United StatesjiaComposed of an aldehyde electrochemical sensor and a central processing unit, its sensitivity is 20-200 times greater than that of a diffusive sensor, and it is suitable for detecting low concentration free states in indoor ambient airjiaAldehyde gas is very sensitive and can detect very low volatility in indoor airjiaAldehydes.

　　4160-IIjiaThe aldehyde analyzer adopts a 3800mA large capacity lithium-ion rechargeable battery, which is easy to operate and can be widely used for indoor environmental detection, indoor environmental governance, environmental decoration, chemical engineering sites, scientific research and teachingjiaAldehyde detection equipment.

　　domestic4160-II jiaAldehyde detector Product Features:

　　1. Standard ppm display unit

　　2. Zeroing can also be carried out in polluted environments

　　3. Electrochemical sensors have a long lifespan, high sensitivity, and do not require complex water injection maintenance

　　4. B-TEST can detect the service life of reminder sensors

　　5. Unique two electrode sensor design, no need for independent battery power supply

　　6. Adopting DC8.4V, 3800mA large capacity lithium-ion rechargeable battery, without alkaline battery

　　7. Adopting INTEASCAN sensors and central processing units imported from the United States, assembled domestically for easy maintenance

　　8. Can completely replace the American 4160-2 model jiaAldehyde analyzer

　　9. Approved appearance patent certificate

　　domestic4160-II jiaAldehyde detector Technical Specifications:

　　Detection principle: Imported electrochemical sensor

　　Testing method: pump suction

　　Display mode: Direct reading digital LCD display

　　Detection range: 0.00-19.99ppm (high-precision recommended not exceeding 5ppm)

　　Resolution: 0.01ppm

　　Response time: 10 seconds

　　Zero drift: ± 1% FS

　　Power supply: DC8.4V, 3800mA;

　　Dimensions: 177 x 103 x226 mm

　　domestic4160-II jiaAldehyde detector Standard configuration:

　　1 host

　　1 portable backpack

　　1 strap

　　One C-12 filter

　　1 connecting hose

　　1 sampling handle

　　1 charger

　　1 tool

　　1 aluminum box

　　1 manual

　　1 certificate of conformity

AfterSalesService :

• Imported formaldehyde tester