The Shijingshan fast rolling shutter door runs smoothly and quickly

Description :

According to the different purposes of each user, there are silent, noise reducing, stainless steel rolling shutter doors, windproof, fireproof rolling shutter doors, and crystal rolling shutter doors.

working method
The motor is hidden inside the roller tube and drives the transmission shaft to rotate, achieving the lifting and lowering of the rolling shutter curtain. When it rises, the curtain wraps around the roller, and when it falls, the curtain slides down along the inner side of the guide rail. The curtain can be raised, stopped, and lowered through remote control. There is also a manual release system with power-off function, which allows the rolling shutter door to be raised or lowered manually with a joystick in the event of a power outage.

                    Shijingshan fast rolling shutter door runs smoothly, quickly and stably

1. During the use of electric rolling shutter doors, it is necessary to maintain the stability of the controller and voltage as much as possible. It is forbidden to install them in very humid environments. In addition, do not open the remote control casually. If there are wires wrapped or knotted on the door body, they should be dealt with in a timely manner. Pay attention to whether the channel is blocked, which hinders the descent of the door. If there is any abnormal response, immediately stop the motor operation.

2. Regularly check the switch of the upper and lower stroke of the electric rolling shutter door, lubricate the stroke controller to maintain normal and good operation. In addition, the operator manually controls the rolling shutter door, checks the operation status, and checks the position of the upper and lower stroke switches to ensure that the electric rolling shutter door is in the appropriate position when opening or closing. During the inspection process, strict precautions should be taken to prevent the electric rolling shutter door from hitting the top or bottom or reversing. If an emergency situation occurs, the rotation should be stopped immediately and the power should be cut off.

3. Operators should regularly check the manual switch and manual lifting decoration of the electric rolling shutter door to prevent it from malfunctioning or causing unnecessary safety accidents in emergency situations.

4. To keep the track running smoothly, clean the track of the electric rolling shutter door in a timely manner, keep the interior clean, regularly add lubricant to the rolling shutter door motor and transmission chain, check the components and switch control box inside the control box, tighten the wiring ports, tighten screws, etc., clean the dust and dirt inside the control box, on the surface, and on the buttons to prevent the buttons from getting stuck and unable to bounce back.

Curtain specifications

Generally, small bicycle garage doors (with a width of less than 3m and a height of less than 2.5m) use 55 or 77 type curtains, while large double garage doors use 77 type curtains.

AfterSalesService :

• Rapid Roller Shutter