Qingyuan replica garage sliding door warehouse wind resistant sliding door manufacturer customized installation
Category:
Security/Access control and attendance equipment/Folding door
Model:
YXS-ZDM01
Brand:
Yongxingsheng
Retail Price
650.00USD
重量
kg
- Product Description
-
Description :
industrySliding doors are divided into vertical lifting, standard lifting, and high-level lifting, while electric sliding doors switch horizontally from the middle to both sides. The choice of industrial door opening method will depend on the analysis of the specific situation and development requirements of your workplace, and each industrial door design has unique characteristics and advantages. Larger doors also include storage stacking doors, folding doors, and other types.
1. Door panelThe total thickness of the door panel is 40mm ± 1mm, with double-sided 0.5mm thick Baosteel color coated steel plate. The coating treatment from top to bottom includes polyester coating, primer, passivation layer, galvanized layer, orange pattern embossing, and positive and negative noodle shaped pressure ribs to strengthen the strength of the door panel. The two layers of steel plates are filled with rigid polyurethane foam material, with a density of about 40kg/cubic meter and a thermal conductivity coefficient of less than 0.033W/m.k. A continuous steel strip is installed at the hinge position to ensure a secure installation of the hinge. A 80mm high reinforcing rib is installed on the inner side of each door panel above 5m to ensure that the door panel has a wind resistance strength of at least level 12. There is a EPDM rubber sealing strip at the bottom of the segmented door panel, which contains an airbag. The heads on both sides of the door panel are made of δ=1.0mm galvanized steel sheet heads.2. Hardware accessories:The door panel connecting hinge is made of hot-dip galvanized cold-rolled steel plate stamping. Material thickness δ=2.0mm, galvanized thickness greater than 28& micro; m. The guide rail is a 3-inch industrial door specific guide rail made of hot-dip galvanized steel sheet rolled with a thickness of δ=2mm; The cross-sectional shape of the guide rail is equipped with anti decoupling to ensure smooth operation of the guide wheel inside the guide rail; The guide rail guard plate is made of hot-dip galvanized steel plate with a thickness of δ=2mm and rolled. The guard plate is equipped with a slot for door side sealing rubber and installation holes connected to the guide rail; The guide wheel is a special guide wheel for industrial doors with a diameter of 72mm. The guide wheel material is wear-resistant nylon, which contains roller bearings and runs smoothly without noise. The remaining hardware accessories are made of hot-dip galvanized steel sheet stamping, with accurate dimensions and good interchangeability.3. Balance system:
The sliding door adopts torsion spring balance, and the balance torsion spring is designed and manufactured based on the door load software calculation to achieve balance. The torsion spring material is made of 60si2Mn imported spring steel, ensuring a service life of over 80000 cycles. The balance shaft of the sliding door is made of solid round steel with a diameter of 25.4. A torsion spring breakage protection device is installed on the balance shaft, which can prevent the door panel from falling when the balance torsion spring breaks; The lifting pulley is an aluminum cylindrical pulley.
4. Industrial sliding operation:Lift the door operation manual control mode and electric control mode:1) Manual control mode: The door can be manually raised and lowered in one go, and in the event of a power outage, the door can be manually opened.2) Electric control mode: On the basis of manual control, there is a standard operation button box next to (inside) each lifting door, which can be opened and closed by operating the up, stop, and down buttons on the button box. And automatically stop when the door reaches the set position.3) Manual/Automatic Switching: The motor is equipped with a clutch disengagement device. When there is a power outage, the clutch disengagement device can be manually operated to switch the driver from electric to manual, and the door can be opened and closed manually.
AfterSalesService :
Key words:- Pirated garage sliding door
More Products
