Shenzhen industrial electric folding door, customized in any style and color

Description :

    Industrial electric folding door is a new type of door specially developed for use in airports, fire garages, power plants, workshops, warehouses, and other places. It is often used in situations where there is insufficient space on both sides of wall openings and at the top. The ideal industrial folding door can be divided into various forms such as four fold, six fold, etc. The door body has multiple operation modes including manual, electric, and remote control, and has performance such as sand and dust prevention and corrosion resistance.

The door body of the ideal industrial folding door is made of 50-75mm polyurethane (polystyrene) composite panel material, with reinforced internal ribs and high-strength alumina alloy profiles wrapped around it.
The surface panel for producing industrial folding doors can be selected as 0.5-0.7mm * * color steel profiled plate or * * color steel flat plate. In addition, the surface color of industrial folding doors can be customized according to customer needs.
The accessories for customizing the ideal industrial folding door are all processed and formed from 2.0mm cold-rolled galvanized sheet, with surface spray treatment to ensure strength while also increasing aesthetics and applicability.

Infrared sensing device: When the door is running, pedestrians or vehicles passing through the sensing range will immediately stop the door.
Airbag: When the door is running and pedestrians pass through it, if the door closes and encounters resistance, the airbag will activate and the door will immediately return.
Sealing performance: EPDM rubber strips are installed around the door body and outer frame to ensure the sealing performance of the door body, which can adapt to cold weather in the north.

1. Door panel:

Adopting a 5cm door panel, a single-layer steel plate with a thickness of 0.5mm, embossed wood grain, horizontal bars pressed on the front and back panels, white color on the front and back panels, and uniform small wood grain pressed on the surface; The door panel is full polyurethane foam, without any impurities such as foam, and the polyurethane foam density is 42 ± 2kg/m3; Each door panel is equipped with continuous strip steel at the installation hinge position to ensure a secure installation of the hinge.

2. The door leaf is surrounded by 50 * 50 * 1.8mm thick square steel, and the door body is equipped with polyethylene plastic sealing strips around it, which have strong anti wind and dust sealing properties and effectively prevent sand and rainwater from entering. Accessories and heavy-duty accessories.

3. Frame: The three perimeter frame of the door is made of 60 * 60 square tubes with a thickness of 2.0mm.

AfterSalesService :

Key words:

• Industrial electric folding door