VOC tester, imported organic waste gas detector

Description :

　　Characteristics of VOC detector:

　　1. Continuous sensitive measurement: PID can detect organic compounds in real-time at concentrations as low as PPb (parts per billion). Specially suitable for the health and safety needs of modern petrochemical, labor hygiene, environmental monitoring and other departments;

　　2. Fast: PID has a fast response time, usually less than 3 seconds, suitable for quick emergency needs;

　　3. Portable measurement: The instrument is small in size and light in weight, and can be carried to any location that needs to be tested. The built-in powerful suction pump can suck up the gas to be tested that is difficult for personnel to reach;

　　4. High safety: The instrument is inherently safe and does not require hazardous carrier gases such as hydrogen;

　　5. Wide adaptability: capable of detecting the vast majority of organic substances within the concentration range of 1 ppb to 10000 ppb;

　　6. Non destructive measurement: Since PID only ionizes organic matter, it will recombine after the organic components leave the detector. Therefore, users can use the powerful suction pump of PID for sampling operations and further laboratory analysis of the tested samples;

　　7. Sensors will not be poisoned: Unlike most other principle based detectors or sensors, PID detectors that use optical principles will not be damaged by high concentrations of the tested substance.

　　Application areas of VOC detectors:

　　1. Detection of chemical weapons of mass destruction agents;

　　2. Emergency response to leakage of highly toxic hazardous materials;

　　3. Detection of TVOC in Indoor Air Quality (IAQ);

　　4. Detection of volatile organic compounds in new building materials;

　　5. Health protection for individuals exposed to highly toxic compounds;

　　6. Aerospace fuel leak detection using hydrazine and dimethylhydrazine tablets;

　　7. Confirmation of Personal Protective Equipment (PPE);

　　8. Environmental survey instruments.

　　Product features of VOC detector:

　　1. The magnification factor of the display value can be set, and it can be restored to normal after restarting;

　　2. High precision, high resolution, fast response;

　　3. The whole machine has a small volume, light weight, waterproof, explosion-proof, and shockproof design;

　　4. High precision, high resolution, fast response;

　　5. Safe and portable device with built-in micro gas pump;

　　6. Digital LCD backlight display, sound and light, vibration alarm function;

　　7. Data recovery function, eliminating worries caused by misoperation;

　　8. The shell is made of special materials and processes, which are not easy to wear and tear, easy to clean, and bright as new after long-term use;

　　9. The upper and lower limit alarm values can be set arbitrarily, with built-in zero and target point calibration functions, built-in temperature compensation, and easy maintenance;

　　10. Using high-capacity rechargeable lithium batteries, it can work continuously for a long time.

　　The VOC detector can detect the following gases:

　　Including: benzene, ethylene, styrene, vinyl chloride, nitric oxide, nitrogen dioxide, dichloroethylene, trichloroethylene, tetrachloroethylene, tetrachloroethylene, acetylene, carbon disulfide, methanol, ethanol, phosphine, acetone, gasoline, petroleum gas, bromomethane, ammonia, dichloromethane, ammonia, and other gases.

AfterSalesService :

• VOC tester