BFE detector, fully automatic meltblown fabric detector

Description :

　　Product features of mask particle filtration efficiency detector:

　　1. Negative pressure experimental system to ensure the safety of operators;

　　2. The negative pressure cabinet is equipped with a peristaltic pump;

　　3. The flow rate of the peristaltic pump can be set;

　　4. The flow rate of bacteria night spray of microbial aerosol generator can be set, and the atomization effect is good;

　　5. Embedded high-speed industrial microcomputer control;

　　6. 10.4-inch industrial grade high brightness color touch display screen;

　　7. USB interface, supporting USB data transfer and storage;

　　8. The cabinet is equipped with high brightness lighting fixtures;

　　9. Built in leakage protection switch to protect the safety of operators;

　　10. Insulation and flame retardancy between the inner and outer layers;

　　11. Front switch glass door, convenient for experimental personnel to observe and operate;

　　12. Detachable bracket with adjustable height;

　　13. Dual purpose casters for support and mobility.

　　As is well known, particulate matter refers to particles with an aerodynamic equivalent diameter of less than or equal to 2.5 μ m in the ambient air, also known as fine particulate matter, commonly referred to as PM2.5. And filtration efficiency refers to the ability of a mask body to filter out particulate matter under specified conditions, indicated as a percentage.

　　The mask particulate matter filtration efficiency detector is a device used to detect the filtration performance, protective filtration efficiency, and filtration effect of protective masks. Currently, masks are mainly divided into air filtration masks and air supply masks; The working principle and function of a mask are that it is a type of hygiene product that is generally worn on the mouth and nose to filter the air entering the mouth and nose, in order to block harmful gases, odors, and droplets from entering and exiting the wearer's mouth and nose. It is made of gauze or paper, etc. By comparing the working principle, it is clear that the protective filtration tester is a testing item used to test the protective filtration performance of masks.

　　Main configuration list of mask particle filtration efficiency detector:

　　1. One host;

　　2. A set of mask testing fixtures, suitable for testing meltblown fabric, flat masks, and three-dimensional masks;

　　3. One set of oil and salt aerosol generators each;

　　4. Laser particle counter;

　　5. Digital gas flowmeter;

　　6. One vacuum pump;

　　7. One needle printer;

　　8. One 7-inch touch screen.

AfterSalesService :

• BFE detector