Mask filtration efficiency testing platform intelligent mask particle filtration efficiency detector

Description :

　　Mask particle filtration efficiency detector Product details:

　　1. The use of a cold gas aerosol generator produces continuous and stable aerosol particles, making it easy to add the solution;

　　2. Using high-precision PM2.5 sensors to measure aerosol concentration;

　　3. Full process particle leakage prevention design to protect the safety of experimental personnel;

　　4. Two sets of aerosol generators: saline particulate aerosol generator and oily particulate aerosol generator;

　　5. Equipped with a static charge neutralization device for aerosol particles;

　　6. Pneumatic fixture with protective device, safe and convenient to use;

　　7. Configure temperature and humidity sensors to display real-time environmental temperature and humidity (temperature and humidity requirements: 25 ℃± 5 ℃, 30% RH ± 10% RH);

　　8. Configure glass rotor flowmeter, vacuum pump, and laser dust particle counter;

　　9. Control system: computer-controlled testing process, automatic data collection, configuration of computer and testing software;

　　10. Computer automatically tests gas concentration and calculates filtration efficiency; Can save, output, query, and print test data;

　　11. Touch screen control, simple and intuitive operation.

　　Main configuration list of mask particle filtration efficiency detector:

　　1. One host;

　　2. A set of mask testing fixtures, suitable for testing meltblown fabric, flat masks, and three-dimensional masks;

　　3. One set of oil and salt aerosol generators each;

　　4. Laser particle counter;

　　5. Digital gas flowmeter;

　　6. One vacuum pump;

　　7. One needle printer;

　　8. One 7-inch touch screen.

　　Mask particle filtration efficiency detector product detailed introduction:

　　1. Using a cold gas aerosol generator to generate continuous and stable aerosol particles, adding the solution is simple and convenient;

　　2. Using two sets of high-precision aerosol particle detection sensors to simultaneously measure the upper and lower chambers;

　　3. Configure a salt particle aerosol generator;

　　4. Configure aerosol particle static charge neutralization device;

　　5. Configure high-precision digital gas flow sensors to measure gas flow rate;

　　6. Configure industrial grade temperature and humidity sensors to measure environmental temperature and humidity in real-time; (Test conditions: 25 ± 5 ℃ 30 ± 10% RH)

　　7. 7-inch touch screen, simple and clear operation;

　　8. Pneumatic fixture, easy and convenient to install and replace samples;

　　9. A silent vacuum pump that integrates suction and exhaust, without the need for an external air source;

　　10. High precision pressure gauge and flow regulating valve, capable of adjusting aerosol concentration;

　　11. Micro printers can print detection data;

　　12. Intelligent configurations such as leakage protection, overload protection, and power-off preservation effectively protect usage safety;

　　13. Testing software that can be connected to a computer (optional).

　　As is well known, particulate matter refers to particles with an aerodynamic equivalent diameter of less than or equal to 2.5 μ m in the ambient air, also known as fine particulate matter, commonly referred to as PM2.5. And filtration efficiency refers to the ability of a mask body to filter out particulate matter under specified conditions, indicated as a percentage.

AfterSalesService :

• Mask filtration efficiency testing bench