Particle filtration efficiency detector, mask, particle filtration efficiency detector brand

Description :

　　Mask particle filtration efficiency detector product detailed introduction:

　　1. Using a cold gas aerosol generator to generate continuous and stable aerosol particles, adding the solution is simple and convenient;

　　2. Using two sets of high-precision aerosol particle detection sensors to simultaneously measure the upper and lower chambers;

　　3. Configure a salt particle aerosol generator;

　　4. Configure aerosol particle static charge neutralization device;

　　5. Configure high-precision digital gas flow sensors to measure gas flow rate;

　　6. Configure industrial grade temperature and humidity sensors to measure environmental temperature and humidity in real-time; (Test conditions: 25 ± 5 ℃ 30 ± 10% RH)

　　7. 7-inch touch screen, simple and clear operation;

　　8. Pneumatic fixture, easy and convenient to install and replace samples;

　　9. A silent vacuum pump that integrates suction and exhaust, without the need for an external air source;

　　10. High precision pressure gauge and flow regulating valve, capable of adjusting aerosol concentration;

　　11. Micro printers can print detection data;

　　12. Intelligent configurations such as leakage protection, overload protection, and power-off preservation effectively protect usage safety;

　　13. Testing software that can be connected to a computer (optional).

　　The mask particle filtration efficiency detector is suitable for conducting tensile tests on various masks and respirators such as medical masks, disposable masks, and respiratory protective respirators. In addition, mechanical property tests such as stretching, tearing, elongation, and peeling can also be conducted on products such as plastics, woven bags, non-woven fabrics, plastic films, products, PVC pipes, paper and cardboard, woven bags, packing belts, tapes, adhesives, etc; Capable of saving experimental data and results, with functions such as curve display, query, and printing.

　　Main configuration list of mask particle filtration efficiency detector:

　　1. One host;

　　2. A set of mask testing fixtures, suitable for testing meltblown fabric, flat masks, and three-dimensional masks;

　　3. One set of oil and salt aerosol generators each;

　　4. Laser particle counter;

　　5. Digital gas flowmeter;

　　6. One vacuum pump;

　　7. One needle printer;

　　8. One 7-inch touch screen.

　　Product features of mask particle filtration efficiency detector:

　　1. Negative pressure experimental system to ensure the safety of operators;

　　2. The negative pressure cabinet is equipped with a peristaltic pump;

　　3. The flow rate of the peristaltic pump can be set;

　　4. The flow rate of bacteria night spray of microbial aerosol generator can be set, and the atomization effect is good;

　　5. Embedded high-speed industrial microcomputer control;

　　6. 10.4-inch industrial grade high brightness color touch display screen;

　　7. USB interface, supporting USB data transfer and storage;

　　8. The cabinet is equipped with high brightness lighting fixtures;

　　9. Built in leakage protection switch to protect the safety of operators;

　　10. Insulation and flame retardancy between the inner and outer layers;

　　11. Front switch glass door, convenient for experimental personnel to observe and operate;

　　12. Detachable bracket with adjustable height;

　　13. Dual purpose casters for support and mobility.

AfterSalesService :

• Particle filtration efficiency detector