Production of Non Methane Total Hydrocarbon Detector VOC Tester

Description :

　　The use of VOC detectors in open spaces:

　　In an open workshop, a portable VOC detector is used to display the VOC concentration on site at any time, anywhere. Some portable VOC detectors are also equipped with vibration alarm accessories to prevent the alarm sound from being inaudible in the presence of noise.

　　The VOC detector is used to continuously measure toxic and harmful organic VOC gases in hazardous or industrial environments. It can be used alone without the need for real-time online monitoring with a host. The SK600 is particularly suitable for personal safety protection and on-site VOC detection. Mainly used for detecting VOC concentration in workshops and factory boundaries, emergency monitoring of safety accidents, and rapid detection of exhaust gas emission concentration standards.

　　Application areas of VOC detectors:

　　1. Detection of chemical weapons of mass destruction agents;

　　2. Emergency response to leakage of highly toxic hazardous materials;

　　3. Detection of TVOC in Indoor Air Quality (IAQ);

　　4. Detection of volatile organic compounds in new building materials;

　　5. Health protection for individuals exposed to highly toxic compounds;

　　6. Aerospace fuel leak detection using hydrazine and dimethylhydrazine tablets;

　　7. Confirmation of Personal Protective Equipment (PPE);

　　8. Environmental survey instruments.

　　The VOC detector can detect the following gases:

　　Including: benzene, ethylene, styrene, vinyl chloride, nitric oxide, nitrogen dioxide, dichloroethylene, trichloroethylene, tetrachloroethylene, tetrachloroethylene, acetylene, carbon disulfide, methanol, ethanol, phosphine, acetone, gasoline, petroleum gas, bromomethane, ammonia, dichloromethane, ammonia, and other gases.

AfterSalesService :

• Non methane total hydrocarbon detector