Beijing has a price for rail transport flatbed trucks, workshop conveyors, glass turning electric leveling trucks

Description :

　　Regarding the product

　　KPDZ type electricTransport flatbed truckThe resistance between the tracks shall not be less than 10 ohms. For this purpose, the steel rails should be insulated. Apply asphalt to the bottom of the rail, pad with 5mm insulation rubber sheet, and fill both sides of the rail with asphalt sand. The actual voltage on the 36V track should not exceed 42V. When the line is not started, it should not be less than 30V, otherwise a compensation line must be added. The operating distance on both sides of the voltage reducing transformer of the transport flatbed truck can refer to the following table, and the distance on one side is half of the values listed in the table. When the distance is longer, the number of step-down transformers can be increased to implement multi-point power supply. The transformers should be connected to the same power phase point, and the number of transformers should generally not exceed 3.

　　[Product Features]

　　The KPDZ transport flatbed truck has the characteristics of simple structure, high load-bearing capacity, low pollution, convenient use, and easy maintenance, and is applied in machine manufacturing and metallurgy. Because the track electric flatcar does not require cables, it does not hinder cross transportation, but the requirements for the track are very high. Because there is no carriage on the workbench of the low-voltage rail powered transport flatbed truck, it needs to travel on the laid track. The car body does not require a steering wheel to turn, it relies entirely on the track to turn. It has the characteristics of low height, reinforced tabletop, easy modification, and convenient maintenance.

AfterSalesService :

• Transport flatbed truck