Trackless car BWP-16T mold maintenance and transportation flat car battery powered trackless electric flat car

Description :

　　[Product Advantages]

　　1. Trackless transfer vehicles do not require the installation of tracks and can walk freely on flat ground. Trackless rubber wheels have slightly higher requirements for the ground, but on cement or steel plates.

　　2. The trackless transfer vehicle is flexible in turning and can achieve 360 degree rotation at rest, with a small turning radius.

　　3. The trackless transport vehicle is equipped with an infrared detection device that can detect obstacles, with a detection distance of 0.3-3 meters (adjustable detection distance).

　　4. The trackless transport vehicle uses imported polyurethane casters, which have high load-bearing capacity, low wear, and beautiful appearance.

　　5. The trackless transfer vehicle is installed with automatic power-off after 5 minutes of unmanned operation, ensuring the service life of the battery and various components.

　　[Selection Reference]

　　1. The BWP trackless electric flat car is powered by batteries, with a lifespan of about 2.5 years and requiring regular maintenance. The flat car can be used on concrete or steel plate floors.

　　2. The BWP trackless electric flat car does not require laying tracks. The flat car is powered by a battery and has no external power source, allowing it to turn freely.

　　3. The BWP trackless flat car can be used in outdoor environments. The flat car uses polyurethane coated wheels, so there is no need to lay tracks and it can be used on flat concrete or steel plate floors.

　　【 Applicable occasions 】

　　1. The advantage of BWP battery power supply is that it is mostly used for transporting steel slag and water in smelting plants. The appearance of the ladle has high problems, so it is necessary to provide thermal insulation protection for electrical components, and fire-resistant bricks should be laid on the trolley for insulation.

　　2. The BWP trackless rubber wheel electric flat car adopts polyurethane coated rubber wheels, which can rotate freely on cement ground without the need for tracks, and is widely used in the industry of transporting workpieces

　　3. Due to the weight and large volume of the molds, most BWP trackless mold transfer vehicles can use trackless electric flatbed transfer vehicles when converting molds, without the need for flexible track conversion.

AfterSalesService :

• Trackless car