Transport trackless battery electric flatbed truck BWP free steering rubber wheel handling vehicle

Description :

　　Working Principle:

　　The BWP series electric flatbed is powered by lead-acid batteries and controlled by a control module as the core; Provide original power with an electric motor; Using controllers and controls as input methods; The steering wheel guides the direction and the fixed wheel jointly bear the weight; Amplify torque with a reducer and provide power to fixed wheels; Using LED as work and warning signs; Using an intelligent charger as an external power input: With the combination of the above functions, the working ability of the BWP series electric flatbed is formed.

　　The BWP trackless flat car (rubber wheeled electric flat car) uses batteries as energy, electric steering, and the motor drives the rubber wheels through a reducer to run. There is no need to lay steel rails on the ground, and it can walk on flat and hard roads inside the factory, with good maneuverability The tires are made of solid polyurethane rubber wheels The battery is a traction battery, and the motor is an industrial traction DC motor The imported continuously variable speed controller comes standard with two control modes: wireless and wire control The power source of the trackless vehicle comes from the lead-acid battery pack inside the vehicle, which is controlled by the onboard control box to provide power to the transmission system through the motor, driving the entire vehicle to start and stop. The usual operating methods are the on-board controller and wireless.

　　Product advantages:

　　This series of electric flatcars can be equipped with various additional devices such as hydraulic lifting system, rollover device, V-frame device, etc., with strong adaptability.

　　The advantage of this model of electric flat car is that it adopts a lifting and metallurgical motor that is suitable for harsh working conditions, and is suitable for harsh and explosion-proof working conditions.

　　This series of track flat cars is mainly used for frequent cross transportation within short distances in workshops, and can also be used in harsh environments such as dust workshops, paint spraying rooms, and cleaning rooms, without any restrictions on work intensity.

　　This series of electric flatcars is a traditional selection scheme for electric track flatcars; Suitable for the selection of large-size crossing schemes.

　　Specific purpose:

　　General: When transporting long steel plates, the specific handling work of electric flat cars is to use one or two flat cars to share the lifting of long steel plates. During this period, the two flat cars should be synchronized to smoothly transport the steel plates to their destination.

　　Universal: The electric flatbed runs on a circular track. When it reaches the starting position and lifts the workpiece onto the flatbed, the flatbed starts to run along the circular track until the workpiece is unloaded at the end position, and then proceeds to the next cycle of work;

　　General purpose: When transporting lathes, the main use of electric flatcars is to transport heavy materials such as large lathes. The general transportation route is a straight line, but in special cases, flatcars need to achieve functions such as lifting and translation.

　　General purpose: When transporting aluminum bars, the main use of electric flatcars is to rely on overhead cranes (also known as overhead cranes) to transport moving objects in most factory workshops. Within the operating range of the crane, there are fewer moving objects to be transported at once, and cross workshop transportation is even more troublesome. Therefore, many companies have added cross workshop transportation equipment in their factory workshops to greatly improve work efficiency.

　　Purchase precautions:

　　The frame structure should be designed reasonably, otherwise it is prone to deformation after heavy loading.

　　Rough rust removal and peeling of paint on the countertop. Inadequate consideration of safety measures: alarm lights, emergency stop buttons, limit switches, etc.

　　The cable specifications of the car body are small and easy to burn out. The gearbox and motor have loud noise. The thickness of the countertop steel plate is low and the deformation is severe.

　　The handle or buttons should be sensitive, otherwise it may cause the car to lose control and lead to safety accidents.

　　The handle button is not flexible and the button cannot pop out;

　　Partial loss of electrical components, incomplete functionality, and inadequate safety measures.

　　If the motor cannot dissipate heat well even in high ambient temperatures, it will burn out when the internal temperature of the motor is too high.

　　The quality of the frame determines the service life and safety performance of the flat car, especially in the case of concentrated loads. Whether the frame can disperse the force and ensure that it does not deform in the case of concentrated loads. If the frame deforms, it will directly affect the fit between the bearing seat, wheel and frame, as well as the fit between the motor, reducer and wheel. Therefore, it directly affects the use of the entire vehicle and the lifespan of its components.

AfterSalesService :

• Battery electric flatbed truck