KPDZ-10T Low Voltage Rail Electric Flat Car Refrigeration Equipment Transfer Flat Car Factory Transfer Flat Car

Description :

　　[Product Introduction]

　　KPDZ series low-voltage trackElectric flatcarIt has the characteristics of simple structure, high load-bearing capacity, low pollution, convenient use, and easy maintenance, and is applied in machine manufacturing and metallurgy. Because the track electric flatcar does not require cables, it does not hinder cross transportation, but the requirements for the track are very high, and the track electric flatcar crosses over the flatcar. Used for transporting heavy objects inside the workshop. Because there are no carriages on the worktable of the track electric flatcar, it needs to travel on the laid track. The car body does not require a steering wheel to turn, it relies entirely on the track to turn. It has the characteristics of low height, reinforced tabletop, easy modification, and convenient maintenance.

　　[Selection Reference]

　　Requirements for track electric flat car:

　　1. The number of step-down transformers should not exceed 3. When the distance is longer, the transformer is connected to the same power phase point to implement multi-point power supply.

　　2. To avoid collisions, there should be a 5mm x 45 degree chamfer at the rail joint on the track. To weld the rails properly, the joints should be ground flat after welding.

　　3. KPD series electric flatcar -36V low-voltage track power supply. Metal parts cannot come into contact with the track, in order to ensure the insulation of the track.

　　4. The voltage should not exceed 42V. On a 36V track, the end of the line should start at a voltage of not less than 30V, otherwise a compensation line needs to be added.

AfterSalesService :

• Electric flatcar