Production line fixed-point material transfer tool vehicle KPC sliding contact line electric flat car manufacturer

Description :

　　Working Principle:

　　The KPC series track flatbed adopts AC motor to drive the operation of the flatbed. The 380V AC power supply provides power to the motor through the sliding block of the safety sliding contact line, thereby realizing the start, stop, forward and backward of the flatbed.

　　The KPC series track flat cars use sliding contact wires for power supply. The sliding contact wires are usually installed between two tracks or on one side. The sliding contact wire slider takes 380V AC power from the sliding contact wire and provides the motor through the electrical control cabinet system to achieve the forward, backward, start, stop and other operations of the car.

　　The power supply method for the KPC series electric flatcar is to set up a trench on the side of the track, install a safety sliding contact line in the trench, and cover the trench with a cover plate. When the electric flat car is running, the cover is lifted by the flipping device installed on the flat car, and the slider is powered to supply power to the flat car. The electric flat car automatically returns to the ground through the rear cover plate.

　　The KPC sliding contact line power supply track flat car introduces the safety sliding contact line into the electrical control system. The sliding contact line is installed in the middle of the track or in the trench on one side of the track, and the power is supplied to the flat car by driving the slider to take electricity through the movement of the flat car. The operation and stop of the car are controlled by the onboard control system.

　　Product advantages:

　　Easy to operate, an on-board control panel can be added to the flatbed for long-distance transportation, meeting the needs of customers and achieving humanized design.

　　Suitable for various usage environments, it can work indoors, outdoors, in high temperatures, and can also be equipped with hydraulic devices, buffering devices, etc. on the flatbed.

　　The flat car adopts a beam structure with a flat tabletop, and can also be equipped with a V-shaped frame according to customer needs. The V-shaped frame can be flexibly disassembled to meet the multi-purpose function of one car, thereby achieving cost reduction.

　　Flat cars can achieve soft start, avoiding the sudden braking of ordinary models and providing greater protection for the safety of transporting workpieces and operators.

　　This series of electric flatcars can be equipped with various additional devices such as hydraulic lifting system, rollover device, V-frame device, etc., with strong adaptability.

　　The advantage of this model of electric flat car is that it adopts a lifting and metallurgical motor that is suitable for harsh working conditions, and is suitable for harsh and explosion-proof working conditions.

　　Specific purpose:

　　Electric flatcars are widely used in industries such as metallurgy, machinery, shipbuilding, power equipment, and petroleum machinery.

　　Electric flatcars are widely used in machine manufacturing and metallurgical factories, as a means of supporting cranes to transport heavy objects over spans within the workshop.

　　Electric flatbed is a type of electric transport vehicle with tracks in the factory. Firstly, it is an electric vehicle that operates automatically under electric drive. Secondly, it is a vehicle that runs on tracks and requires laying tracks on the ground. The tracks are generally I-shaped contact tracks.

　　Electric flatcars have the characteristics of simple structure, convenient use, high load-bearing capacity, no fear of dirt or smashing, easy maintenance, and long service life. Due to their many advantages such as convenience, solidity, economy, practicality, and easy cleaning, they have become a transportation tool for frequent transportation of heavy objects within and between factory buildings over short distances.

　　Purchase precautions:

　　If the motor cannot dissipate heat well even in high ambient temperatures, it will burn out when the internal temperature of the motor is too high.

　　The quality of the frame determines the service life and safety performance of the flat car, especially in the case of concentrated loads. Whether the frame can disperse the force and ensure that it does not deform in the case of concentrated loads. If the frame deforms, it will directly affect the fit between the bearing seat, wheel and frame, as well as the fit between the motor, reducer and wheel. Therefore, it directly affects the use of the entire vehicle and the lifespan of its components.

　　The frame made of spliced steel sections has a lower load-bearing capacity, so when selecting a flat car with a super heavy load, attention should be paid to the structure of the frame to avoid danger caused by overweight.

　　The load-bearing capacity of the frame is not only reflected in the thickness of the steel plate and the size of the steel section, but also in the welding process, rust removal, painting, and other factors that affect its performance. For example: whether welding slag, sand holes, rust removal, primer, number of spray paint layers, etc

　　Flat cars run on the track and require high precision in wheel installation. Wheel installation cannot cause rail gnawing, and wheel wear is fast, which affects the performance of use. The coordination between motors and reducers is particularly important. Some manufacturers produce flat cars with extremely loud noise. The reason for this is that the selection of motors and reducers is unreasonable, which not only causes energy waste but also affects production efficiency.

　　As the main transportation equipment in the workshop, the image of the flat car largely reflects the level and taste of the workshop. Therefore, when choosing, it is best to choose a flat car with a beautiful appearance to avoid reducing the impression of the factory when customers visit.

　　Try to choose manufacturers with patent certificates, as the strength of technical expertise determines the quality, and patent certificates are a reflection of the strength of technical expertise.

　　The bearing seat is an important factor affecting the load-bearing performance of a flatbed. Generally speaking, a flatbed with two bearing seats performs better than one with one bearing.

AfterSalesService :

• Material transfer tool vehicle