Customized 100 ton heavy-duty rail electric flatbed and new energy electric flatbed by the manufacturer of handling flatbed trucks

Description :

　　Electric batteryMoving flatbedPrecautions for operation and use:

　　（1） 1. Operation button station for handling flatbed: Before driving, first close the air switch inside the control box, then turn on the operation switch on the control box panel, and then turn on the self-locking emergency stop button on the button station. At this time, the flatbed is in a preparatory working state. Press the front or rear button (jog) to move the flatbed forward or backward. This flatbed has two speeds. When the forward or backward button is pressed, the flatbed is in a low-speed starting state. At this time, press (release) the speed control button on the control handle again to put the flatbed in a high-speed running state. The two speeds cannot be converted to each other, only from low speed to high speed, and cannot be converted from high speed to low speed.

　　2. When stopping in an emergency situation, press the emergency stop button on the control handle.

　　3. The end of the flat car is equipped with a dedicated socket for charging the battery.

　　（2） The

　　1. Handling flatbed operation button station and Yao control operation (with Yao controller): Refer to the above instructions for button station operation. If Yao control operation is used, first place the operation switch (three positions: manual, stop, Yao control) on the control box in the Yao control position, then press the start button of the Yao control first, and then press the up or down button (jog) to move the flatbed forward or backward.

　　2. The end of the transport flatbed is equipped with a dedicated socket for charging the battery.

　　3. Please note during operation: When not in use for a long time, be sure to turn the switch on the control box to the stop position.

　　4. In case of emergency, if you need to stop the vehicle, you can manually press the emergency stop button on the control handle or press the Yao control emergency stop button on the Yao controller.

　　（3） The handle knob of the transport flatbed is equipped with stepless speed control operation: turn on the air switch inside the electric control box, rotate the switch outside the electric control box to the open position, rotate the emergency stop button on the operation button station, and turn the speed control potentiometer knob counterclockwise to the zero speed position. After the above operation, the flatbed is in the preparatory working state, and you can perform left or right driving (or forward, backward) operation. When driving on the left or right, press the left or right button and do not release it (jog). Rotate the speed control knob to reach the speed you need.

AfterSalesService :

• Moving flatbed