Steel plate handling electric rail car KPDS-33T AC three-phase low-voltage rail electric transfer flatbed car

Description :

　　[Product Advantages]

　　1. Provide power to single-phase capacitor motors for flatcars (YZ lifting and metallurgical motors for three-phase). Due to the fact that the walking track also serves as a feeder track, insulation is required between the tracks, between the wheels and the vehicle body, and special insulation treatment is required during track laying.

　　2. The three low voltage track powered electric flat car is mainly suitable for situations with large carrying tonnage. Generally, this model is recommended for those with a carrying tonnage exceeding 50 tons. The car requires three tracks to be laid, including two load-bearing tracks and one point track. The trolley takes power from all three tracks at the same time to make it run. The advantage of this model is that it has a large carrying tonnage and low noise.

　　3. This series of electric flatcars can add automatic control functions. The electric flatcars are powered by tracks and are suitable for transporting large tonnage loads.

　　[Selection Reference]

　　1. There are high requirements for the laying of tracks, which require insulation treatment and are not limited by distance. However, if the operating distance exceeds 50 meters, the number of transformers needs to be increased to compensate for the track voltage drop.

　　2. This series of track flatbed cars is mainly used in frequent starting and stopping situations, and the working intensity should not be too high, such as in flammable, explosive, ferrying and other working environments.

　　3. Suitable for medium to long-distance transportation with a load capacity of over 50t (≥ 50t), high frequency of use.

　　4. This series of electric flatbed trucks is mainly suitable for the working environment of S-shaped turning and curved turning workshops.

AfterSalesService :

• Transporting electric rail cars