Rail flatbed car Jiangsu manufacturer double track platform car case 25 ton low-voltage rail flatbed car price

Description :

　　Regarding track construction

　　KPD seriesRail flatbed carThe resistance between the tracks shall not be less than 10 ohms. For this purpose, the steel rails should be insulated. Apply asphalt to the bottom of the rail, pad with 5mm insulation rubber sheet, and fill both sides of the rail with asphalt sand. The actual voltage on the 36V track should not exceed 42V. When the line is not started, it should not be less than 30V, otherwise a compensation line must be added. The operating distance on both sides of the step-down transformer can refer to the table below, and the distance on one side is half of the values listed in the table. When the distance is longer, the number of step-down transformers can be increased to implement multi-point power supply. The transformers should be connected to the same power phase point, and the number of transformers should generally not exceed 3.

　　Regarding Selection

　　The KPDZ series electric track flatbed is mainly used for transporting materials or workpieces with a weight not exceeding 50T in the workshop. Generally, there is no limit to the working time per day, and it can be started and stopped frequently; Mainly used in frequent starting and stopping situations, with no limit on work intensity, and generally not suitable for working environments with accumulated water; Rail flatbed trucks are suitable for workpiece handling work environments that require hydraulic lifting. The load capacity for transporting workpieces generally does not exceed 50T, and they are used frequently, with no restrictions on strength, and in insulated rail power supply environments.

AfterSalesService :

• Rail flatbed car