Engine manufacturing workshop track electric flat car KPT-43T cable powered electric leveling car

Description :

　　[Selection Reference]

　　1. Due to its simple structure and low cost, it is a common track flat car for workshop crossings. This flat car is suitable for situations where the operating distance is not long (≤ 20m), the frequency of use is high, and the overall height of the vehicle is low; For situations where the running distance is short and the running speed is slow, drag chains can be used to reduce cable wear.

　　2. The running distance of this series of flat cars should not be too long, generally below 20m, and is suitable for situations with high frequency of use and low vehicle height. The mechanism is simple and the cost is low. It is a common track flat car for workshop crossing. In situations with short running distance and slow running speed, drag chains can be used to reduce cable wear.

　　3. This series of flat cars has a simple mechanism and low cost, and is a common cross track flat car in the workshop. The running distance is generally below 20m. In situations where the running speed is slow and the running distance is short, drag chains can be used to reduce cable wear. It is suitable for situations with high frequency of use and low vehicle height.

　　Product Q&A

　　Q: Can we change the track after we finish transporting a cargo?

　　Answer: The hydraulic lifting system can be used to ground the rubber wheels and turn them into trackless flatcars. They can freely change tracks to transport goods to another track, and then lower them through the hydraulic lifting device to connect the track wheels and achieve the purpose of changing tracks.

　　Q: How high temperature can a steel car withstand?

　　Answer: Although the temperature of the molten steel is high, the ladle itself has insulation function, so the outer surface temperature of the ladle generally does not exceed 200 ℃, and radiation to the environment will not affect electrical components and other parts.

　　Q: What are the differences between a steel car and a regular electric flat car?

　　Answer: This model is structurally different from ordinary electric flatcars. Firstly, the height of the ladle is small at 1m, and it contains dangerous goods such as molten steel inside. In order to minimize the center of gravity of the ladle, the platform of the ladle is mostly designed with a hollow shape. The ladle is placed in the concave part of the platform, and there is a crossbeam on the platform. The lifting hole of the ladle can be placed on top to increase the load-bearing capacity. Secondly, in order to adapt to the harsh environment of the steelmaking furnace, the configuration of accessories such as motors and reducers for crane ladle cars is higher than that of ordinary ladle cars, and usually two sets of drive systems are used. Assuming that one set of drive systems fails, it can avoid the condensation of molten steel in the ladle due to the stop of the flat car movement, which can reduce the losses of the enterprise.

AfterSalesService :

• Rail electric flatcar