Manufacturer of KPT-20 ton rail electric shuttle car for industrial semi-finished product turnover track flat car

Description :

　　Working Principle:

　　The KPT series electric flat car is a cable powered electric flat car, which is equipped with a drag chain. One end of the cable is connected to the ground power supply, and the steel wire rope is pulled into the control box through the cable pulley. Then, the YZ motor on the flat car is powered, and the motor drives the flat car to run smoothly through the reducer.

　　The KPT series flatcar is equipped with an AC 380V cable that is directly introduced into the flatcar electrical control system to control the flatcar's start, stop, forward, backward, and other functions.

　　The KPT towing cable electric flatcar is powered by the cable towed by the flatcar during operation. One end of the cable is connected to the ground power supply, and the other end is introduced into the electric flatbed through the iron clamp device of the flatbed.

　　Product advantages:

　　The characteristics of this series of electric flatcars are compact and reliable structure, economical price, and convenient track construction.

　　The advantages of this model of flat car are easy operation, simple maintenance, and low failure rate.

　　The characteristic of electric flatcars that can travel without fuel is not possessed by any fuel powered vehicle. This feature is not only applicable to factories, but also to short distance transportation. The main characteristics are as follows: 1. Environmental protection, energy saving, and low operating costs. 2. Low investment, high return rate. 3. High performance and enormous potential for high-tech sustainable development.

　　Most factory workshops rely on cranes (also known as overhead cranes) to transport moving objects. Within the range of crane operation, there are few moving objects that can be transported at once, and cross workshop transportation is even more troublesome. Therefore, many companies have added cross workshop transportation equipment in their factory workshops to greatly improve work efficiency.

　　Purchase precautions:

　　If the motor cannot dissipate heat well even in high ambient temperatures, it will burn out when the internal temperature of the motor is too high.

　　The quality of the frame determines the service life and safety performance of the flat car, especially in the case of concentrated loads. Whether the frame can disperse the force and ensure that it does not deform in the case of concentrated loads. If the frame deforms, it will directly affect the fit between the bearing seat, wheel and frame, as well as the fit between the motor, reducer and wheel. Therefore, it directly affects the use of the entire vehicle and the lifespan of its components.

　　The frame made of spliced steel sections has a lower load-bearing capacity, so when selecting a flat car with a super heavy load, attention should be paid to the structure of the frame to avoid danger caused by overweight.

　　The load-bearing capacity of the frame is not only reflected in the thickness of the steel plate and the size of the steel section, but also in the welding process, rust removal, painting, and other factors that affect its performance. For example: whether welding slag, sand holes, rust removal, primer, number of spray paint layers, etc

　　Flat cars run on the track and require high precision in wheel installation. Wheel installation cannot cause rail gnawing, and wheel wear is fast, which affects the performance of use. The coordination between motors and reducers is particularly important. Some manufacturers produce flat cars with extremely loud noise. The reason for this is that the selection of motors and reducers is unreasonable, which not only causes energy waste but also affects production efficiency.

AfterSalesService :

• Turnover track flatcar