Two phase track flat car case: Henan electric track flat car manufacturer customized factory heavy-duty handling equipment
Two phase track flat car case: Henan electric track flat car manufacturer customized factory heavy-duty handling equipment

Two phase track flat car case: Henan electric track flat car manufacturer customized factory heavy-duty handling equipment

Category:

Transportation/Rail transit equipment and equipment/Rail Transit Transport Vehicle

Model:

KPDZ-30T

Brand:

one hundred percent

Retail Price

43,600.00USD


重量

kg

  • Product Description
  • Description :

      How to operate the two-phase track flat car correctly?

      1. The user must arrange a dedicated person to operate and maintain the two-phase track flat car. Before use, the operator must carefully read the product manual to understand the performance and maintenance knowledge of the track electric flat car.

      2. No items unrelated to transportation are allowed to be placed within a range of one meter on each side of the electric flatbed track.

      3. The materials should be evenly distributed on the platform of the two-phase rail flatbed, and overloading is strictly prohibited.

      4. The track electric flat car must start smoothly after ringing the bell. During operation, the operator should be fully focused, always pay attention to any abnormal situations around, and be prepared to stop at any time. During operation, the flat car must not touch the "stop iron" at the end of the track.

      During operation, the track electric flat car should run slowly and it is strictly prohibited to change the direction of travel quickly.

      6. During movement, it is prohibited to inspect and clean the track flat car, and it is strictly forbidden to use the track electric flat car to lift, collide, drag, or pull other vehicles or objects on the track.

      After major repairs, it must be accepted by the user unit and meet safety requirements before it can be put back into use. It is strictly prohibited to operate and use with illness.

      If there is a sudden power outage during work, the control switch should be reset to zero position. After work is completed, the power must be cut off, the load must be unloaded, and the equipment must be cleaned.

      When using a two-phase track flat car, it is necessary to add gearbox gear oil. During use, it is necessary to ensure sufficient lubricating oil for the gearbox and regularly check for oil shortage and change the oil.

    AfterSalesService :

    Key words:
    • Two phase track flat car