Color steel tiles are being supplied nationwide

Description :

　　Color steel tile supply in progress

　　The storage, transportation, storage, transportation, and loading and unloading of Shandong color steel coils are important links that affect the color coated board. Due to improper operation, various defects such as scratches, imprints, corrosion, etc. may occur during storage, transportation, and loading and unloading. To avoid the occurrence of various defects as much as possible, the following are some precautions for operation. Specific regulations regarding storage, transportation, and loading/unloading can be found in relevant materials or consulted with experts.

　　2. Storage

　　The product should be stored indoors in a dry and ventilated area, avoiding outdoor storage and places where condensation and temperature differences are prone to occur.

　　The product should be stored clean and tidy, avoiding the erosion of various corrosive media.

　　The ground of the storage site should be flat and have sufficient load-bearing capacity.

　　Steel coils should be installed on devices such as rubber pads, wooden pads, and brackets, with the strap lock facing upwards and not directly on the ground or transportation vehicles.

　　To avoid crushing, steel coils are usually not stacked and stored. When stacking steel plates, the number of layers should be strictly controlled, and the weight and size of the plates should be wrapped underneath.

　　The mechanical properties and partial coating properties of color coated plates, such as pencil hardness, T-bend value, impact energy value, etc., may vary with storage time. Therefore, it is recommended that users process them as soon as possible.

　　The storage site should have sufficient space for the use of lifting equipment.

　　Reasonable arrangements should be made for the storage location of steel plates and coils to facilitate access and minimize unnecessary use.

　　3. Transportation

　　The product should be transported in its original factory condition and the original packaging should not be disassembled at will. Rubber pads should be added between the lifting equipment and the products during loading and unloading to prevent collision. If conditions permit, specialized lifting equipment should be used.

　　The carriage of the transport vehicle should be cleaned, and rubber pads or other protective devices should be placed on the bottom of the carriage. Necessary protective measures should also be taken around the carriage to prevent packaging from being creased or damaged.

　　Steel coils packaged vertically should also be kept upright during transportation and loading/unloading.

　　The product should be firmly fixed to avoid relative damage or accidents during transportation.

　　When removing the steel plate, it should not be dragged to prevent damage to the steel plate underneath from the incision and cutting. Steel plates should be handled with care and not touched by others.

AfterSalesService :

• color steel tile