Manufacturer's geomembrane welding machine, automatic climbing welding machine, lightweight waterproof climbing welding machine

Description :

　　Manufacturer's geomembrane welding machine, automatic climbing welding machine, lightweight waterproof climbing welding machine

　　1. Scope of application HH-615 type Scope of application: Welding of all hot-melt materials such as PVC, PE, PP, EVA, etc. with a thickness of 0.2-2.0mm, with a welding width between 80-160mm. 2. Working principle: The motor drives the gearbox, and the chain drives the upper and lower pressing wheels for transmission. The movable bracket drives the middle of the two base materials of the hot wedge, and at the same time, the pressing arm applies pressure to the pressing wheels to press the upper and lower hot melted base materials together. 3. Welding work △ Before laying the geomembrane, the surface condition of the foundation layer should be checked, and it is required that the surface of the foundation layer is flat, without any lumps, plant roots, etc., to prevent damage to the geomembrane. For the laid geomembrane or composite geomembrane, both sides should be inspected, and any edges that are not neat should be trimmed. It is not allowed to have concave and convex folds or gaps. At the same time, the sand and pollutants on the membrane surface should be cleaned and kept clean to meet the welding requirements. The overlapping direction of the welding edges of the two geomembranes (usually welding from top to bottom, left to bottom, and right to top when constructing on a slope) should ensure that the overlapping part is 8cm-16cm to ensure the operation of the welding machine. A good geomembrane should be pressed down with sandbags to prevent wind blowing. 2. Welding requirements: When applying the film to the welding machine, the overlap size should be accurate and quick. ·During welding, operators should closely monitor the condition of the weld seam and ensure timely welding speed to ensure welding. ·The operator must monitor the power supply voltage within 220V ± 5% at all times. If the voltage is too low, it may damage or affect the welding machine. Manufacturer's geomembrane welding machine, automatic climbing welding machine, lightweight waterproof climbing welding machine

　　Related articles: Thick film geomembrane welding machine, geomembrane waterproof board welding machine, crawling welding machine wholesale

AfterSalesService :

• Climbing welding machine