3ZBQ-10/10 Pneumatic Grouting Pump Manufacturer

Description :

　　Product Introduction of 3ZBQ-10/10 Pneumatic Grouting Pump 3ZBQ-10/10 Pneumatic Grouting Pump is mainly used for grouting reinforcement, water blocking, filling and other engineering construction of fractured rock layers; Eliminate underground hazards in flood control and rescue operations. The outstanding advantages of this series of grouting pumps are high pressure, high efficiency, light weight, and easy mobility; Widely used, it can be used to inject single component slurry or two-component chemical slurry; It can also serve as an emulsion pump, high-pressure water pump, hydraulic pump, etc. Especially suitable for coal mines, non coal mines, water conservancy, hydropower, subway, construction, bridge construction projects, as well as places with high flammability, explosiveness, temperature and humidity changes. The significance of the model of 3ZBQ-10/10 pneumatic grouting pump

　　Model: 3ZBQ-10/10 Pneumatic Grouting Pump;

　　3ZB - Type code: coal mine plunger grouting pump;

　　Q - Feature code: Power source type: Pneumatic

　　10/10- Main parameters: Discharge flow rate (L/min)/discharge pressure (Mpa) at 0.5Mpa.

　　Technical parameters of 3ZBQ-10/10 pneumatic grouting pump

　　Gas source pressure MPa: 0.3-0.63;

　　Repetition times/minute: ≥ 40

　　Gas consumption m3/min: ≤ 2.0

　　Ventilation pipe diameter in.: 3/4, or 25K type quick connector

　　Suction pipe diameter in.: 3/4

　　Discharge pipe diameter mm.: 13

　　Mixing ratio: 1:4

　　Rated pressure (source pressure 0.5MPa) MPa: 10

　　Rated flow rate (discharge pressure 10MPa) L/min: 10

　　zmjt055

AfterSalesService :

• Pneumatic grouting pump