Supply grouting pipe, grouting pipe parameters, grouting pipe characteristics

Description :

　　Grouting pipe is a pre embedded grouting pipe system used for sealing construction joints, cold joints, pipe seepage joints, and gaps between ground walls in concrete. It is very suitable to install grouting pipes between the joints of new and old concrete. When water seeps into the joint, it can be sealed by injecting grout into the PVC port on the surface to seal the joint. The appropriate grouting time can be chosen to be after the concrete curing is completed. Leakage joints can also be sealed using this method. zmjt055

　　Performance characteristics of grouting pipes

　　Injecting grout into pre embedded grouting pipes can seal construction joints, cold joints, pipe leaks, and joints between ground walls. The characteristics of grouting pipes include disposable grouting pipes (CCLL-Y grouting pipe, QDM-IT grouting pipe, CCLL-Y full section grouting pipe) and reusable grouting pipes (CCLL-D grouting pipe, CCLL-D full section grouting pipe). Disposable grouting pipes can only be grouted once and cannot be reused. Repetitive grouting pipes can be reused multiple times, and the core and outer wall of the pipe need to be washed clean after each use. Specification of grouting pipe: One time grouting pipe inner diameter: 8mm; outer diameter: 12mm; inner diameter tolerance: ± 0.3mm; length per roll: 120m. Repetitive grouting pipe inner diameter: 8mm; outer diameter: 20mm; inner diameter tolerance: ± 0.3mm; length per roll: 90m.

　　Advantages of grouting pipes

　　1. Easy installation, provided as a complete set; 2. The grouting pipe can be cut at the construction site according to the actual required length of the joint (it is recommended that the length of the grouting outlet should not exceed 6 meters); 3. No special installation equipment is required; 4. The grouting time can be arbitrarily selected; When injecting grout into the pipe under appropriate pressure, the grout can maintain a uniform filling of the entire pipe; 6. The system allows for relatively low pressure slurry; The grouting pressure is 0.2-0.4Mpa. 7. Installation will not affect the characteristics of the building grouting pipe itself; 8. The installation or grouting process will not harm the concrete; 9. After grouting, it can ensure sealing; If there is no leakage, grouting is not necessary.

AfterSalesService :

• grouting pipe