Steel wire rope flaw detector with great advantages

Description :

　　The wire rope flaw detector is a combination of advanced flaw detection technologies from both domestic and international sources. A portable intelligent electromagnetic non-destructive testing instrument for steel wire rope is developed using digital processing and network technology. Widely used in mining, cableway, lifting equipment, elevators, port machinery, cable bridges and other fields.

　　The steel wire rope flaw detector can display quantitative values of broken wires, rust, wear, and changes in metal cross-sectional area inside and outside the steel wire rope in real time. It can provide diagnostic reports and solutions according to current standards and regulations, achieving rapid diagnosis of steel wire rope damage, reducing the detection time of steel wire rope by multiple times, and not affecting normal production during detection. It solves the problems of low efficiency of manual rope inspection, inability to detect internal damage, and human factors. The instrument is easy to carry, simple to operate, and can be operated and used by operators after simple training. It has high detection accuracy, good repeatability, and accurate damage localization.

　　Technical parameters of wire rope flaw detector

　　Testing the diameter range of steel wire rope: Φ 1.5-300mm

　　Relative speed between sensor and wire rope: 0.0-6.0 m/s

　　：1.0 m/s。

　　Wire breakage defect (LF) detection capability:

　　Qualitative: The accuracy rate of qualitative detection of broken wires in centralized units is 99.99%.

　　Quantitative analysis: The number of broken threads in a single location can be misjudged by one or an equivalent number of threads. The accuracy of quantitative detection of the number of broken threads in a single location without error is ≥ 95% for more than 100 times.

　　Metal cross-sectional area change (LMA) detection quantitative change detection capability:

　　The allowable error for repeatability of detection sensitivity is ± 0.05%.

　　Allowable error of detection accuracy indication: ± 0.2%.

　　Location (L) detection capability:

　　Percentage error of detection length indication: ± 0.3%.

　　Environmental temperature: -10 ℃~40 ℃

　　Atmospheric pressure: 86~106Kpa

　　Relative humidity: ≤ 85%

　　Power supply: Battery powered.

　　zmjt055

AfterSalesService :

• Wire rope flaw detector