Lhasa 6kV Dry Transformer Transformer Model

Description :

　　Shandong Changneng Transformer Manufacturing Co., Ltd. can provide railway transformers, rectifier transformers, electric furnace transformers, mining transformers, various flat and special transformers, and box type substations according to user requirements!

　　Dry type transformer form:

　　1. Open type: It is a commonly used form, with its body in direct contact with the atmosphere, suitable for relatively dry and clean indoor environments (when the ambient temperature is 20 degrees, the relative humidity should not exceed 85%), and generally has two cooling methods: air self cooling and air cooling.

　　2. Closed type: The device is located inside a closed shell and does not come into direct contact with the atmosphere (due to poor sealing and heat dissipation conditions, it is mainly used for mining and belongs to the explosion-proof type).

　　3. Casting type: using epoxy resin or other resin casting as the main insulation, it has a simple structure, small volume, and is suitable for transformers with smaller capacities.

　　Structural characteristics of dry-type transformers:

　　Due to its strong short-circuit resistance, low maintenance workload, high operating efficiency, small size, and low noise, dry-type transformers are commonly used in places with high performance requirements such as fire and explosion prevention.

　　1. Safe, fireproof, pollution-free, and can operate directly in the load center;

　　2. Adopting domestic technology, it has high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, and long service life;

　　3. Low loss, low noise, significant energy-saving effect, maintenance free;

　　4. Good heat dissipation performance, strong overload capacity, can increase capacity operation when forced air cooling;

　　5. Good moisture resistance, suitable for operation in high humidity and other harsh environments;

　　6. Dry type transformers can be equipped with comprehensive temperature detection and protection systems. Adopting an intelligent signal temperature control system, it can automatically detect and display the working temperature of each three-phase winding, automatically start and stop the fan, and have functions such as alarm and trip settings;

　　7. Small size, light weight, small footprint, and low installation cost.

　　Characteristics and structure of dry-type transformer:

　　1、 Temperature control system:

　　The safe operation and service life of dry-type transformers largely depend on the safety and reliability of the transformer winding insulation.

　　2、 Cooling method:

　　The cooling methods for dry-type transformers are divided into natural air cooling (AN) and forced air cooling (AF). During natural air cooling, the transformer can operate continuously for a long time at its rated capacity. When forced air cooling is used, the output capacity of the transformer can be increased by 50%. Suitable for intermittent overload operation or emergency overload operation; Due to the significant increase in load loss and impedance voltage during overload, it is in a non economic operating state and should not be subjected to long-term continuous overload operation.

　　Working environment of dry-type transformer:

　　1. 0-40 (℃), relative humidity<70%;

　　2. Altitude: not exceeding 2500 meters;

　　3. Avoid exposure to rainwater, moisture, high temperature, high heat, or direct sunlight. The distance between its heat dissipation ventilation holes and surrounding objects should not be less than 40cm;

　　4. Prevent working in places with corrosive liquids, gases, dust, conductive fibers, or metal shavings;

　　5. Prevent working in places with vibration or electromagnetic interference;

　　6. Avoid long-term inverted storage and transportation, and avoid strong impact.

　　Shandong Changneng Transformer Manufacturing Co., Ltd. adheres to the quality policy of "developing with quality and surviving with reputation", and the business philosophy of "adhering to sincere service and winning the trust of customers from all over the world". We always insist on winning the market with quality and excellent service.

AfterSalesService :

• Dry Transformer