Gastroscopy room trolley stable medical transfer bed

Description :

　　Model: FG-F-03

　　Size: 1880 * 620 * 560-890MM

　　1. The whole vehicle is made of thickened cold-rolled steel plates, which are sturdy and durable;

　　2. The car surface and guardrail are made of imported PP material and molded in one go, which is solid and beautiful;

　　3. The bed board is made of durable material with higher strength and no deformation;

　　4. Back lifting system: controlled by high-quality silent gas springs; Within a range of 75 degrees, it can be positioned freely;

　　5. High and low lifting system: controlled by imported hydraulic air pump, the lifting is smooth and quiet, and can be adjusted up and down or tilted left and right by foot; The height is 560-890mm;

　　6. PP resin molded guardrail boards on both sides, with a height of 300mm, are safer for patients and can also be horizontally fixed to increase the width of the bed, providing a comfortable place for the arms of the infusion recipient. They can also move the patient and the bed in both directions; And it has dual safety locks for locking, preventing misoperation and improving the safety of operation;

　　7. The guardrail board is equipped with an angle display, which facilitates knowing the angle at which the back is raised during care; There is a groove in the middle of the guardrail on both sides to prevent the catheter from slipping and facilitate infusion and drainage. Aluminum die-casting integrated guardrail bracket, with higher strength, humanization, and better appearance;

　　8. The bed is equipped with a flip type writing board at the end, which is convenient for medical staff to write or place items;

　　9. Rolling rubber anti-collision wheels are installed at the four corners of the bed, effectively reducing the impact received during vehicle collisions;

　　10. Equipped with advanced central control braking system, one foot braking and simultaneous fixation of all four wheels; Equipped with 200mm universal/directional casters, easy to operate by one person;

　　11. The central control brake linkage rod adopts integrated circular tube molding to ensure higher strength;

　　12. Independent center fifth wheel system: Both sides of the cart are equipped with control pedals, and the center fifth wheel can move freely when retracted; When in use, it is in the "straight" state (with a pedal height of 105mm above the ground for better passability), overcoming the inertial force during transportation, effectively controlling the forward direction, and making the transportation process safer;

　　13. There is an integrated tray under the bed that can hold oxygen cylinders, making it easy to use. The tray can support a weight of 10Kg.

　　14. Equipped with an infusion rack storage rack to securely store the infusion rack.

　　15. Mattress: Made of fabric surface waterproof treatment, easy to clean, equipped with zippers, and the external fabric can be washed with water.

AfterSalesService :

• Cart for gastroscopy room