Underground integrated prefabricated pumping station for domestic sewage

Description :

　　The integrated sewage lift pump station is an ideal substitute for traditional sewage pump stations. Usually, traditional pump stations have very strict requirements for planning and construction, requiring every detail to be planned, and the installation of pump stations also requires a lot of manpower, material resources, and time. It is necessary to arrange the construction site and pour concrete, which requires a lot of time to wait for the concrete to harden. Then it is necessary to determine the water inlet point, drill holes, and install the necessary components. It will take at least 2 months to complete these processes. In the construction process of the pump station, it is also necessary to cooperate with contractors of various processes. These unnecessary processes will consume a lot of energy from planners, and the engineering quality of each contractor will also vary.

　　The integrated sewage prefabricated pump station is mainly used as a sewage treatment device below ground level in municipal industrial basement drainage, subway drainage, living areas, factories, etc,

　　Schematic diagram of integrated lifting pump station structure

　　Accessory standards: All accessories are designed and manufactured in the factory, including pressure pipelines, maintenance platforms, inlet and outlet pipes, etc. Strict debugging is carried out before leaving the factory to ensure the reliability of the pump station.

　　Beautiful appearance: The pump station is completely buried underground, with only maintenance holes and control boxes left on the ground. It can also be equipped with a landscape style management room placed on the ground to coordinate with the surrounding environment.

　　Cost savings: The pump station is supplied as a complete set, and all internal installation and commissioning work is completed in the factory. Only the pump station needs to be installed as a whole on site, greatly reducing the civil construction period and engineering costs, and lowering the overall investment of the owner.

　　Service life: The pump station cylinder is made of fiberglass material, and the internal accessories are made of anti-corrosion materials such as SUS304 and hot-dip galvanizing, which do not require maintenance. The normal service life can reach more than 7 years.

　　PPS integrated prefabricated pump station (also known as sewage lifting pump station) is a device for lifting and draining sewage, rainwater, drinking water, wastewater, etc. It is a turnkey new generation of environmentally friendly pump station designed, manufactured, assembled and transported to the site for installation by the factory.

　　Integrated prefabricated pump station products have modern product characteristics such as short construction period, easy installation, small size, high efficiency, and intelligent networking. Compared with traditional pump stations, the amount of civil engineering is less and the investment can be reduced by more than half. The product has reliable quality and is a substitute for traditional concrete sewage pumping stations.

AfterSalesService :

• Underground integrated prefabricated pump station