Jinze anti floating assembled buried water tank
Category:
Security/Firefighting equipment/Fire pump
Model:
JZ-DM-03
Brand:
Kanazawa
model:
JZ-DM-03
Occasions for use:
Engineering fire pump
purpose:
voltage stabilization
Power source form:
electric motor
Auxiliary features:
Ordinary fire pump/pump set
Export pressure type:
low pressure
Processing & Customization:
yes
Export pressure value:
three hundred
rated flow:
twenty
shaft power:
two hundred and thirty-three
Diameter of suction port:
three hundred
Discharge outlet diameter:
two hundred and fifty
Operating Temperature:
thirty
Place of Origin:
Yancheng, Jiangsu
Is it imported:
No
Item Number:
DM-305
Is it a cross-border source of goods:
No
manufacturer:
Yancheng Jinze Water Supply Equipment Co., Ltd
Retail Price
16,800.00USD
重量
kg
- Product Description
-
model JZ-DM-03
Occasions for use Engineering fire pump
purpose voltage stabilization
Power source form electric motor
Auxiliary features Ordinary fire pump/pump set
Export pressure type low pressure
Processing & Customization yes
Export pressure value three hundred
rated flow twenty
shaft power two hundred and thirty-three
Diameter of suction port three hundred
Discharge outlet diameter two hundred and fifty
Operating Temperature thirty
Place of Origin Yancheng, Jiangsu
Is it imported No
Item Number DM-305
Is it a cross-border source of goods No
manufacturer Yancheng Jinze Water Supply Equipment Co., Ltd
Description :
Jinze anti floating assembled buried water tank Featuring all the characteristics of a regular stainless steel water tank, it is corrosion-resistant and impact resistant. Due to being buried underground, the buried stainless steel water tank does not occupy any ground space and is made of food grade stainless steel material
Material, safe and hygienic, not prone to secondary pollution. Underground stainless steel water tanks are generally welded together, which are not easy to leak, rust, and have a long service life.
1. The buried stainless steel water tank company uses hot-dip galvanized steel plates and stainless steel plates to be pressed and composite formed by equipment, so as to achieve the strength of the steel plate material, the corrosion resistance of stainless steel, and other requirements.
2. After compression molding, punching molding is carried out through equipment to meet the assembly requirements of standard modules.
3. The on-site assembly of the high-level fire water tank and the use of national standard hot-dip treatment for the foundation channel steel are combined with a spacing of 1 meter between each beam, and so on.
4. Assemble according to the atlas and technical requirements, and assemble with hot-dip galvanized screws and environmental water resistant and anti-aging adhesive strips. After the water tank is assembled and formed, install the tie bars and top columns. Hot dipped zinc is used for tensioning, without 1
Installation of meters vertically and horizontally crossing. The top pillar is sealed with 4 hot-dip galvanized pipes evenly distributed per square meter.
5. Install the pump room according to the pump station, use screws on the outside of the pump room, and reinforce the inside of the pump with No. 12 I-beam to achieve good pressure bearing effect. After installation, inspect and accept to ensure that all fasteners are tightened without omission.
6. Clean up all remaining accessories and garbage in the water tank.
7. Cover the soil and prepare the site properly. Before covering the integrated buried box pump, the water in the pit must be pumped out to ensure that there is no accumulated water in the pit;
The soil used for covering must be fine soil, free of debris and stones;
When covering the soil, the excavator must be 2 meters away from the water tank and cannot walk on top of the water tank;
When covering the buried water tank with soil, it is necessary to start adding soil from all sides, adding soil in a circle of 50cm upwards until it is parallel to the ground.
AfterSalesService :
Key words:- Buried water tank
More Products
