Underground box pump integrated buried finished fire water tank

Description :

　　Integrated buried box pump How to use and maintain the integrated buried box pump correctly: 1. Choose a site with good ventilation, less dust, and no humidity, with an environmental humidity of -10 ℃ -40 ℃. Rainproof and lightning protection facilities should be installed outdoors.

　　For the convenience of equipment installation and maintenance, a 70cm space should be left around the equipment, a 1.5m space should be reserved at the manhole, and drainage ditches should be set up on the surrounding ground. After selecting the site, the foundation should be prepared and the tank support seat should be poured with concrete or built with bricks and stones. After the base is completely cured, lift the tank and stabilize it, then install the accessories and turn on the power. Before the test drive, the water supply valve should be closed first, and the condition of each sealing valve should be checked. There should be no leakage. After driving, attention should be paid to the direction of the pump. When the pressure gauge pointer reaches the upper limit, the pump automatically stops. Open the water supply valve to supply water normally. If timed water supply is required, turn the selection switch to the manual position.

　　Integrated buried box pump The integrated backup pump unit of buried box pump should be regularly inspected, maintained and lubricated. If leakage is found in centrifugal pumps and check valves, the flange screws should be tightened or asbestos roots replaced in a timely manner. The pump foot bolts should be checked to prevent damage to the machine. The electrical automatic control system should be waterproof and dustproof, and the insulation of the circuit should be checked regularly to ensure that the connecting bolts are loose and the wires are intact. Wrap the pressure gauge with transparent material to prevent damage. If the paint peeling off is found on the integrated tank body of the buried box pump, it should be painted and maintained in a timely manner to extend its service life

AfterSalesService :

• Integrated buried box pump