YPAI-2800 Flattening Machine 2 meters 8 meters Ironing Machine 3 meters Single Roll Flattening Machine Manufacturer

Description :

　　YPAI-2800 ironing machine is a manufacturer of 2.8-meter ironing machine and 3-meter single roll ironing machine. The ironing machine is a machine equipment used for ironing bed sheets and covers in hotel laundry rooms, washing plants, and laundry facilities. The ironing machine is a type of washing machinery and belongs to the laundry room ironing equipment. Its main components are usually a single or two rollers (modern ironing machines may contain three rollers), which are rotated by hand or by electricity. Rollers are heated by steam or electricity to a certain temperature. When damp clothes are rolled between two rollers, they can remove a large amount of moisture and achieve the effect of ironing. They are used in the flattening process of bed sheets, tablecloths, fabrics, and so on.

　　1、 Fully automatic variable frequency speed regulation ironing machine series: YPI-1800 (mm) single roll ironing machine, YPI-2500 (mm) single roll ironing machine, YPI-2800 single roll ironing machine, YPI-3000 (mm) single roll ironing machine, YPII-1800 (mm) double roll ironing machine, YPII-2500 (mm) double roll ironing machine, YPII-2800 (mm) double roll ironing machine, YPII-3000 double roll ironing machine, YPIII-3000 (mm) 3 roll ironing machine;

　　2、 The performance of the fully automatic single roll ironing machine.

　　1. The transmission components, cycloidal pinwheel reducer, and frequency converter are combined with a 4-stage speed regulating motor to provide sufficient power for the equipment. Driven by a chain, the equipment runs smoothly, only under overload can it be strong, with low noise. Each chain is installed with tension, making it easy to adjust the tightness. This machine adopts a wide belt conveyor and is separated by spacers to avoid the difficult problem of belt movement during transportation. At the same time, it adopts a micro buckle connection, which is very convenient for installation, disassembly, and replacement.

　　2. The hotel uses a ironing machine to set sprockets with corresponding numbers of teeth between different levels of the conveyor system, creating a speed difference that makes the fabric easier to tension and iron. Further use guide strips for isolation to ensure that the fabric does not adhere.

　　3. This machine has set corresponding speed differentials between different levels of the conveying system, making the fabric easier to tension and iron.

　　4. This machine adopts a cycloidal pinwheel reducer and a speed regulating motor or frequency converter for speed regulation. Driven by a chain, the equipment runs smoothly, has strong overload capacity, low noise, and each chain has a tensioning device for easy adjustment of tension.

　　5. This machine adopts a wide belt conveyor and is separated by spacers to avoid the difficult problem of belt movement during transportation. At the same time, it adopts a micro buckle connection, which is very convenient for loading, unloading, and replacement.

　　6. The safety system of the linen ironing machine ensures safety throughout the entire process. The safety system consists of finger protection safety barriers, micro switches, emergency stop buttons, etc. The safety barrier is installed in front of the rolling mill for flattening clothes. When fingers or other parts of the operator's body accidentally come into contact with the heating surface of the drum or the rolling mill, they will inevitably hit the safety barrier first. At this time, the micro switch will activate and the whole machine will immediately stop running. When encountering a dangerous situation, pressing the emergency stop button can also immediately stop the entire machine. If a steam heated space hotel linen ironing machine is used, the steam inlet is equipped with a safety valve, which has been adjusted before leaving the factory. During normal operation, it generally does not need to be adjusted, and users must send it to the labor department for verification once a year.

　　7. For steam heated ironing machines, the steam shut-off valve next to the drain valve should be opened first, and the steam inlet valve should be opened later. After the residual water in the drum is drained, it should be closed; Then turn on the speed regulating motor or frequency converter controller, slowly rotate its knob, and run the ironing machine at a low speed of 2-3m/min. At the same time, fully open the inlet valve, heat the drum, and observe the pressure reading on the left box of the ironing machine. Only when the steam pressure reaches 0.3MPa or above, can ironing work begin.

　　8. The large diameter stainless steel drum of the ironing machine has high ironing efficiency. The diameter of the stainless steel ironing cylinder with a diameter of 800mm produced according to the national pressure vessel standard is 3.5mm. The thickness of the drum is made of 304 stainless steel ironing machine with a large diameter stainless steel drum according to the national standard. The larger the diameter, the larger the linen area ironed in each rolling cycle, and the higher the efficiency. Suitable for different materials of linen and thickness requirements.

AfterSalesService :

• ironing machine