Taizhou Medical Washing Machine XGQ-50FA Washing Machine Manufacturer Price Consultation

Description :

Taizhou Medical Washing Machine Manufacturer Price Consultation

　　There are three heating methods for the fully automatic hospital washing machines produced in our factory: steam heating, electric heating, and both steam and electric heating. Users can freely choose according to their actual situation. If the hospital laundry room equipment model you choose is over 50 kilograms (including 50 kilograms), an external air compressor is required to control the door lock and protect safety; When compressed air enters the machine, it passes through an oil-water separator to separate the moisture in the compressed air, ensuring the safety of the solenoid valve. There is a pneumatic drain valve located in the bottom right corner of the back of the fully automatic hospital washing machine, which is controlled by an electromagnetic valve through compressed air for opening and closing. There is a safety emergency stop switch installed next to the operation panel of the machine. If accidentally pressed, the fully automatic hospital washing machine will stop running, improving the safety of operators.

　　One of the main indicators for selecting a medical washing machine is mechanical force. The power used during the use of fully automatic hospital washing machines, such as kneading, rubbing, brushing, stirring, and rotating, is directly proportional to the magnitude of mechanical force. But when washing, it is necessary to fully consider the characteristics of the fibers and the age of the linen. This selection of mechanical force is necessary to achieve satisfactory washing results without damaging the linen. The control system of a fully automatic hospital washing machine consists of a computer panel, computer chip, program software, various sensors, solenoid valves, etc. The outer cylinder of the machine is welded with stainless steel plates and used to hold washing water. It is connected to the inlet pipe, steam pipe, soap liquid pipe, overflow pipe, and drain valve. Angle air valves are installed on the inlet and steam pipelines, and solenoid valves are installed on the soap liquid pipeline. The inner liner is made of stainless steel plate, and the cylinder wall is equipped with overflow holes and tipping ribs. The transmission mechanism of a fully automatic medical washing machine consists of a frequency converter, a variable frequency motor, a pulley, a triangular tape, and a bearing seat. The machine door is made of stainless steel and is equipped with a rubber sealing ring inside, which is sealed with the barrel during operation. The door lock is used to open or close the machine door, ensuring that the door will not be opened during the operation of the fully automatic medical washing machine. A pneumatic linkage switch is installed inside the door lock to ensure the safety of the operator. The above briefly introduces the mechanical performance of laundry room equipment in small and medium-sized hospitals, as well as the operation process of stainless steel fully automatic medical washing machines and medical dryers.

　　Main features of medical fully automatic washing machine:

　　1: The fully automatic washing machine adopts a foreign computer control system, introduces advanced international technology, has a reasonable structural design, and a beautiful appearance. Each project is equipped with voice prompts and displays the operating status and progress of the machine, making it easy and accurate to operate. 2: Breaking the conventional water level sensing control method, using time to control the water supply to determine the water level, the operation is fast and accurate. 3: Equipped with stainless steel water tank and water pump water supply facilities, it saves laundry time and is convenient to use; 4: The panel and inner cylinder are made of stainless steel material to prevent rusting and corrosion; 5: In case of unexpected abnormal situations, an automatic voice warning will be issued, and emergency measures can be taken in advance. 6: By using the structural assembly method, it can be assembled under the fire dike of high-rise buildings and is easy to maintain; 7. A unique multi-channel additive system is designed, which completes the addition of auxiliary materials in one go. The reasonable integration of hot and cold washing and dehydration ensures high cleanliness, making the whole machine fully functional and superior in performance; 8. Adopting internationally advanced pressure type liquid level sensing systems and advanced domestic probe detection methods to effectively improve water level detection sensitivity, reduce daily maintenance, and enhance work efficiency.

　　Welcome to the page of Taizhou Washing Equipment | Taizhou Washing Equipment Prices | Taizhou Washing Equipment Prices, provided by Taizhou Xinxin Huizi Washing Machinery Manufacturing Co., Ltd. The contact phone number is, and the address is located at No. 18 Zhanqian Road, Taizhou City, Jiangsu Province. Our main business includes washing equipment, laundry room equipment, washing machines, industrial washing machines, and ironing machines.

AfterSalesService :

• Taizhou Medical Washing Machine