Changguang Communication GJXFH-2B6A2 fiber optic 8-shaped butterfly introduction optical cable manufacturer

Description :

　　The optical cable contains 1-4 coated silica based optical fibers, which can be classified as ITU-T G.657A (C1) or G.652D (B1.3). The same batch of products should use the same design, materials, and processes to manufacture the optical fibers, which should be placed at the center of the cable. The coating layer of the optical fiber can be colored, and the color of the colored layer should be blue, orange, green, brown, and single fiber that can be the natural color in accordance with GB 6995.2. The coating structure, fiber strength screening level, mode field diameter and size parameters, cutoff wavelength, and bending loss of single-mode optical fibers used for cabling shall comply with the provisions in Tables 1, 2, and 3 below. The reinforcing components in optical cables can be metal reinforcing components made of high-strength stainless steel wire or phosphated steel wire, or non-metallic reinforcing components made of polyester aramid wire or other suitable fiber bundles, and should have sufficient Young's modulus and elastic strain range. The reinforcing components of the optical cable should be 2, parallel and symmetrical to the optical cable A thick steel wire suspension line on the side.

　　Technical Specifications

　　Features:

　　The fiber optic cable has a simple structure and special bending resistant fibers, providing greater bandwidth and enhancing network transmission characteristics. Unique groove design, lightweight, easy to peel off, and convenient for splicing. Self supporting steel wire or steel twisted rope, with two parallel non-metallic FRP reinforcement elements placed on both sides.

AfterSalesService :

• Changguang Communication