ADSS fiber optic cable pre twisted tangent line clamp small span suspension line clamp Jiangsu manufacturer
Category:
Radio and Television/Wired cable equipment/Cable junction box
Model:
hardware
Brand:
Changguang Communication
Retail Price
50.00USD
重量
kg
- Product Description
-
Description :
OPGW fiber optic cable manufacturer OPGW power communication fiber optic cable
Pre twisted tangent line clamp for ADSS optical cable
Product Description:
Composition: pre twisted wire, rubber clamp block, casing, ZH right angle hanging ring, U-shaped hanging ring, bolt, nut, etc.
Function: It mainly serves as a support, hanging ADSS optical cables on towers with a line angle of less than 25 °. Tangent line clamps can be used for spans ≤ 150m, while suspension line clamps are required for medium and large spans>150m.
Differentiation: The difference between tangent line clamps and suspension line clamps is that tangent line clamps do not have ZH hanging rings or outer pre twisted wires.
Scope of application: The model can be selected according to the cable diameter and line span tension design. It can be used with clamps in pole lines or with tower connectors in tower lines.
Features: 1. The suspension clamp has a large contact area with the ADSS optical cable, with uniform stress distribution and no stress concentration points. At the same time, it enhances the stiffness of the optical cable at the hanging point position, providing better protection.
2. It has good dynamic stress bearing capacity and can provide sufficient gripping force to protect ADSS optical cables from safe operation under unbalanced load conditions.
3. The structure is equipped with flexible rubber clamps to enhance self damping and reduce wear.
4. End rounding treatment has increased the corona inception voltage.
The aluminum alloy material of 5 has improved the mechanical and anti-corrosion properties of the wire clamp, greatly extending its service life.
Ordering instructions: 1. Select the appropriate suspension clamp based on the operating span, outer diameter, ultimate tensile strength and other parameters of ADSS optical cable.
2. Quantity configuration: 1 set/tower with a line angle of less than 25 °
3. In order to meet the needs of installing ADSS optical cables on 10kV distribution lines in urban networks, our company has developed and produced suspension clamps suitable for spans of 150 meters or more and up to 1200 meters. It has a simple structure, easy installation, and can reduce project costs.
AfterSalesService :
Key words:- Tangent line clamp
More Products
