Good self-adhesive anti cracking sticker for direct sales of road surface maintenance, convenient construction, not easy to fall off anti cracking sticker

Description :

　　Instructions for using anti crack stickers

　　What is anti cracking adhesive tape? Many people may not understand it. As a new type of simple and high adhesion highway anti cracking adhesive tape in recent years, anti cracking adhesive tape has also been recognized by many people because of its unique advantages. In highway joint filling, anti cracking adhesive tape also occupies a major position. Due to the use of asphalt orcrack sealantWhen the temperature is low, it is easy to solidify. The anti cracking sticker is equipped with a Yamaha generator set to provide overall power. The anti cracking sticker adopts a constant temperature control system at the discharge pipe to avoid material burning and aging, ensuring smooth discharge.

　　The first level transmission of the anti crack sticker adopts a triangular belt transmission. Due to the tension of the triangular belt, the impact force during emergency stop and return is reduced, ensuring the flexible operation of the anti crack sticker and increasing its service life; During the maintenance process of highways, it is not just about random construction. There is also a process involved, and crack filling is a common method in highway engineering. Crack resistant sticker manufacturers will focus on explaining the indicators for highway crack filling. The high-temperature resistant fabric on the surface of the anti cracking sticker has a high tensile strength, which can resist the tensile stress at the interlayer cracks, limit the development of crack width, and play a reinforcing role, thus enhancing the tensile strength of the local structural layers of asphalt pavement.

　　Crack resistant stickers are mainly operated by hand pushing and hand-held grouting pipes, and are used for models with smaller melt boxes for crack resistant stickers. When working, first add asphalt or joint sealant into the material box to one third of the place, ignite the furnace tray of the combustion furnace (ignite through the baking gun, not directly ignite with an open flame if there is liquefied gas in the combustion chamber, which will be dangerous). After ignition, adjust the flame to the burning flame. At this time, the heat transfer oil in the melting material box begins to rise, and the temperature can be clearly displayed through the temperature watch.

　　The dissolution time is about 90 minutes. Adjust the flame size based on the melting temperature of the grouting material. After about 30 minutes of dissolving the material, start the generator and turn on the power switch of the discharge pipe to heat the pipe (about 40 minutes). After the material melts and the temperature of the discharge pipe reaches, it can work. The anti cracking adhesive tape without a handheld grouting tube is used to feed and grout the crack with the material outlet aligned with the crack; For those with handheld grouting tubes, use grouting tubes to treat the cracks and grout them. Add materials at any time during the work process to ensure continuity of work. The discharge flow rate of the asphalt pump can be adjusted.

AfterSalesService :

• Crack resistant sticker