U-shaped tank dump semi-trailer market

Description :

　　weLiangshan Tiantong Automobile Co., LtdThe lightweight semi-trailer used is made of high steel, advanced technology, and designed to create a new generation of lightweight semi-trailer; By using high-strength steel and optimizing the design of the semi-trailer, the self weight of the semi-trailer can be reduced by more than 1 ton without changing the load-bearing capacity of the semi-trailer. This can effectively reduce the weight of the semi-trailer by more than 1 ton, and can be used for tank trucks, tank trucks, tank semi trailers, tank bulk dump trucks, tank bulk dump trucks, and manufacturers of dump semi trailers

　　Tank type dump trucks achieve efficient transportation of dry mixed mortar. The dry mixed mortar that has been produced and proportioned is transported to the construction site by a dry mixed mortar transport vehicle. Pneumatic conveying is used to reduce the dry mixed mortar and deliver it to a dedicated mortar tank. On site, only water needs to be added for mixing, and construction projects such as walls can be carried out to avoid environmental pollution such as dust and noise caused by on-site mixing, thereby improving the construction environment and enhancing construction quality. The key technology is to solve the segregation problem of dry mixed mortar during loading, transportation, and unloading, ensuring the quality of dry mixed mortar.

　　1. The lifting dry mixed mortar transport vehicle is developed based on the bulk transportation of granular materials, with structural characteristics:

　　Hydraulic air suspension cone material bin unloading system, no segregation, fast unloading speed (1.6T/min), extremely low residual ash rate (0.2 ‰)

　　2. Unloading principle:

　　Unloading is the process of using a hydraulic lifting cylinder to stack the entire material towards the cone position of the tank body. A special air flotation unloading device fluidizes the mortar within a local range of the cone (with a diameter of 20CM), and compressed gas forms an approximately spiral "air knife" at this position to gradually peel off and fluidized the material, while forming secondary mixing. The landscape road is quickly unloaded, avoiding the separation of the mortar due to large-scale and long-term agitation, and the air consumption is small, with a residual ash rate of almost 0 (0.2 ‰).

　　3. Equipped with a dedicated unloading device (quick release valve), it achieves rapid cleaning of residual materials, effectively solving the problem of mixing caused by transporting residual materials in each vehicle, and ensuring the quality of dry mixed mortar.

　　4. In order to meet the requirements of domestic standards for the technical quality of dry mixed mortar, the dry mixed mortar transport vehicle is equipped with a dedicated fast sampling device, which provides a guarantee for real-time monitoring and detection of the quality of dry mixed mortar.

　　Due to the above characteristics, it is easy to transport ordinary mortar, special mortar, or dry sand in production materials.

AfterSalesService :

• U-shaped tank dump semi-trailer