Pull wind power transport vehicle

Description :

　　Wind power transport vehicle, wind turbine blade transport vehicle, cylinder blade transport vehicle, wind power equipment transport vehicle

　　Blade transport vehicle, wind blade transport vehicle, hydraulic steering wind turbine blade transport vehicle, wind blade transport semi-trailer. As the name suggests, a 35 meter wind blade transport semi-trailer is a vehicle used to transport wind turbine blades. The characteristic of a wind blade transport semi-trailer is that it has a longitudinal expansion and contraction function. Due to the large length of the vehicle, it increases the difficulty of turning. In order to overcome the difficulty of driving on curves, wind blade transport vehicles are generally equipped with hydraulic steering systems.

　　Pull type fan blade transport semi-trailer, up to 50 meters long, three-axis balanced, remote power steering, equipped with a mass balance block between the front and rear steel plate springs, can make the deflection of the front and rear steel plate springs change equally, and balance the force on the front and rear axles.

　　The total length is 460000/(17.5 * 22 * 6.5) X3000X1810m, which can be fully pulled apart. The bearing capacity is designed to be 80 tons. The height of the main beam is 550mm and the width is 300mm. The main beam is buckle box shaped, and the side beam is 250mm I-beam. The cargo surface is 850mm low, and the bottom plate is 4 # patterned plate with tires of 11.00R-20.

　　This model is designed specifically for transporting wind turbine blades and can be extended up to 44 meters in length. Due to the length of the cargo itself, the difficulty of turning has greatly increased. In order to overcome the difficulty of driving on curves, the rear axle is used, and a power station is coordinated at the rear axle. At the same time, considering the stability requirements of the cargo, the rear axle also adopts a self-developed suspension system, cleverly solving the foreseeable difficulties during loading. This wind turbine adopts a secondary stretching of 23 meters and a rear pulling of 5 meters to ensure a total length of 44.15 meters; Adopting a two axle steering system, equipped with a small hydraulic station, and manually controlled to achieve steering, with a turning angle of 35 degrees; Under the plate spring, the cargo platform is low, and the longitudinal beam can be pulled and pulled freely, with good passability.

　　There are three types of semi trailers for transporting wind blades: ordinary pull-out wind blade transport semi-trailer, axial wind blade transport semi-trailer, and lifting wind blade transport semi-trailer. Below, we will introduce to you respectively:

　　① The ordinary pull-out fan blade transport vehicle is somewhat similar to a low flatbed transport vehicle, but its main beam adopts a buckle box design. The main beam adjusts the length of the vehicle by pulling to adapt to different lengths of fan blade transport. It is understood that the current pull-out fan blade transport semi-trailer in China can be up to 50 meters long.

　　② The difference between the axial fan blade transport semi-trailer and the ordinary pull-out fan blade transport vehicle is that the chassis adopts a hydraulic axial design, which makes the cargo platform of the fan blade vehicle lower and the steering more flexible.

　　③ A lift type fan blade transport semi-trailer refers to a fan blade transport vehicle equipped with a hydraulic lifting device, mainly aimed at the difficulty of transporting wind blades in mountainous areas. In flat roads, the wind blades are transported horizontally. When encountering situations where the turning radius in mountainous areas is extremely small, use a lifting device to raise the height of the transported items (usually 5-10 meters), shorten the length of the entire vehicle, and bypass obstacles. It is reported that there are not many domestic enterprises producing lift type fan blade transport semi-trailer special vehicles, and only Yunnan region has the use of this lift type fan blade transport vehicle.

AfterSalesService :

• Wind power transport vehicle