Shanxi container dump truck

Description :

　　Rear overturned container semi-trailer, container flatbed rear overturned dump truck, rear overturned dump flatbed truck, domestic oil roof truck Guangdong Fuhua 13 ton 16 ton piece, two or three pieces, eight or twelve 1100 tires (triangle, Linglong, double star, double money) can be selected Sub frame I-beam Can reach a height of 5-6 meters The entire vehicle body is made of steel, advanced technology, and strict production processes. The vehicle structure is reasonable, the performance is reliable, the operation is simple, and the appearance is beautiful. The semi-trailer frame is of a through beam structure, and the longitudinal beam adopts a straight or goose neck type. The web plate height ranges from 400mm to 550mm and is welded with manganese plate. The longitudinal beam is welded with automatic submerged arc welding, and the frame is shot blasted. The crossbeam penetrates the longitudinal beam and is welded as a whole. The suspension adopts a non independent steel plate stamping rigid suspension (optional air suspension) consisting of a series of steel plate springs and suspension supports, with a reasonable structure and high stiffness, used to support loads and reduce impacts. This product has reliable quality and wide applications, and has become a model for medium and long-distance vehicles. Mainly applicable to the medium to long distance transportation of medium to heavy and bulk goods, and the suitability of the transported goods. The entire vehicle is optimized using advanced computer-aided design software, and the frame is subjected to finite element analysis based on the vehicle's load-bearing quality requirements for scientific design and reasonable load distribution. The axles, tires, and other purchased components are all products produced by domestic and foreign manufacturers.

　　Consultation Hotline

　　Optional air suspension, lifting bridge

　　 The design and research of an air suspension semi-trailer with a lift axle, consisting of a single front axle and air suspension dual rear axles, with one of the dual rear axles having a lift axle. This article mainly studies the mid and rear axle suspension system of semi-trailer, and conducts relevant design and analysis. The working state of fuel trucks is divided into two types: full load and empty load. When the vehicle is running without load, the lifting bridge floats off the ground to reduce rolling friction resistance, coordinate steering motion, achieve fuel saving, reduce tire wear, extend service life, and save operating costs; When the vehicle is fully loaded, lifting the bridge can effectively increase the vehicle's load-bearing capacity, reasonably meet the axle load requirements stipulated by regulations, and ensure the safe use of vehicles, roads, and bridges. The air suspension system with a lifting bridge improves the overall performance and quality of use of the vehicle. While increasing the load-bearing capacity of specialized vehicles, it also distributes axle loads more reasonably, ensuring transportation safety, reducing fuel consumption, and saving energy. It can bring better economic benefits to users while meeting traffic regulations. This study used UG software to establish a simplified 3D model of the entire vehicle, including the cab, frame and front axle, lifting axle and drive axle, and conducted spatial verification; Then, using ADAMS software, models of the air suspension system, steering system, powertrain, tires, and road surface of the vehicle were established, and a complete vehicle model was built based on these models. This article conducts simulation analysis and evaluation of the overall driving smoothness of two types of suspensions, steel plate spring and air suspension. The results show that the overall driving smoothness of air suspension is better than that of steel plate spring suspension, proving that matching air suspension on semi-trailer is feasible and meaningful.

　　In order to adapt to the current weight based charging and strict dual governance transportation environment, and meet the needs of users for vehicles with "light" weight, load-bearing capacity, and profitability, the company imported Swedish high steel lightweight rail semi-trailer. After repeated and extensive experiments, it was grandly launched!

　　Detailed introduction of product features:

　　◆ Innovative Design: This light semi-trailer is a new type of light vehicle that has undergone multiple innovations through FEA (Finite Element Analysis) analysis, drawing on advanced design concepts from both domestic and international sources, based on a thorough understanding and analysis of transportation environments in various regions. Convex and concave penetrating beam structure.

　　Shanghai Baosteel height steel: The web, bottom, and key parts are made of advanced technology standard height steel. ◆ Light weight: Adopting a convex concave through beam structure, and carrying out multiple local weight reductions while ensuring structural integrity, the weight is light.

　　◆ Bearing capacity: By adopting Shanghai Baosteel's high steel and structural innovation, the same bearing capacity is maintained while reducing self weight.

　　Suitable for the current transportation environment of weight based charging. In order to adapt to the current transportation environment of weight based charging and strict dual governance, and meet the needs of users for vehicles with "light" weight, load-bearing capacity, and profitability, the company has designed a lightweight semi-trailer using Shanghai Baosteel height steel. After repeated and extensive experiments, it has been grandly launched!

AfterSalesService :

• 20 foot container dump truck