Customized biogas slurry transport vehicle manufacturer Dongfeng Dorica D9_ fecal biogas slurry suction and discharge vehicle

Description :

　　Customized biogas slurry transport vehicle manufacturer Dongfeng Dorica D9_ fecal biogas slurry suction and discharge vehicle

　　The biogas slurry and manure transport vehicle is a tank type vehicle that collects and transports livestock and poultry manure, domestic manure water, and farm biogas slurry to avoid secondary pollution. It can self suction and discharge, has fast environmental protection work speed, and is easy to transport. The rear tank door can hold liquid

　　The pressure automatically opens for easy cleaning of sediment inside the tank, suitable for collecting and transporting feces, biogas slurry, manure, etc...The tank has a capacity of 2.8 cubic meters, 3 cubic meters, 4 cubic meters, 5 cubic meters, 6 cubic meters, 8 cubic meters, 10 cubic meters, 12 cubic meters, 15 cubic meters, and other vehicle models. Ordinary vehicles

　　During the transportation of livestock and poultry manure, the poor sealing of vehicles often leads to phenomena such as sludge dripping and leaking, which can cause repeated environmental pollution. With the demand for maintaining urban environment and the upgrading of vehicles, manufacturers are researching new solutions

　　The livestock and poultry manure transport vehicle effectively solves the dilemma of environmental protection transportation. Customized biogas slurry transport vehicle manufacturer Dongfeng Dorica D9_ fecal biogas slurry suction and discharge vehicle

　　Customized biogas slurry transport vehicle manufacturer Dongfeng Dorica D9_ Fecal biogas slurry suction and discharge vehicle equipped with vacuum suction pump, can self suction and discharge, widely used for suction of feces, sewage, biogas slurry water and mixed with small suspensions

　　Liquid with floating debris. Suitable for cleaning and dredging work in environments such as breeding farms, municipal sanitation, vehicles of all sizes, residential areas, schools, septic tank cleaning and transportation, factory sludge, sewage ditches, and sewers

　　The vehicle.

　　The suction truck tank body adopts one-time molding and grinding technology, with a straight and full weld seam, CT detection, no bubbles, no broken welds, and no nodules. After the tank body is formed, high-pressure gas leak testing and shot blasting pretreatment process are used to achieve rust removal

　　Rust prevention: The tank is equipped with anti wave partitions, which give it high strength, stable center of gravity, and safe and stable vehicle transportation. Install anti overflow devices to prevent feces and sewage from being filled and poured back into the vacuum pump system. Paint used

　　Car metal paint coating, with a more stylish and beautiful appearance, and longer rust prevention time. Customized biogas slurry transport vehicle manufacturer Dongfeng Dorica D9_ fecal biogas slurry suction and discharge vehicle

　　What's the reason why the suction truck hasn't been able to suck for many years? The sanitation truck manufacturer tells you to check the following places: self suction and self discharge biogas slurry transport vehicle -5 cubic meters/8 tons/5 cubic meters/10 cubic meters/biogas slurry removal vehicle recommended

　　1. To inspect the suction pipe of the car, first draw a can of water and check if there are any cracks or fissures in the suction pipe during the suction process. Then, check if the joint under supervision is not tightly wrapped.

　　2. Check if the leather ring of the rear cover of the suction truck has corroded? Is the discharge valve on the suction tail tilted or has a problem with the leather pad?

　　3. Check if the tank has rusted through or if there are any cracks caused by collision.

　　We will first check all the above reasons. If there are no problems, we will remove the screws of the pump. After removing the pump casing, we will check whether the pump blades inside are deformed or scratched. If there are any, we will replace the pump blades. There is a small amount of pump blades

　　The plates are made of iron and mostly composite products, which look like plastic plates. If the pump plates are not a problem, consider replacing the pump, which can save unnecessary economic expenses.

　　Customized biogas slurry transport vehicle manufacturer Dongfeng Dorica D9_ fecal biogas slurry suction and discharge vehicle

AfterSalesService :

• Manufacturer of biogas slurry transport vehicles